Page 21 - Skilled Trades Brochure 2023 WEB

Fundamental Fluids FM1000 Fundamental Fluids FM1000

Flow Sensor LOCKTRONICS
Main Workstation The Flow sensor module houses a calibrated turbine

flow sensor. It is used to provide flow rate readout in
The main workstation is built of rugged steel and the app and on the control module screen.
LOCKTRONICS
has a built-in panel which allows you to easily clip
on the required component. Two water tanks, with a It can measure 0-30l/min
combined capacity of 3L, along with inbuilt connectors, It has robust brass fittings for repeated assembly/
allows students to quickly set up each experiment. disassembly.
When in storage, the flow pipes drop down into the
frame, all components are stored within, the drip tray
doubles as a back panel to enhance protection. ELECTRICAL MACHINES

Bourdon Gauge

The Bourdon gauge calibration module is used to
ELECTRICAL MACHINES
compare a known, dead-weight acting through a
Control Box piston/cylinder of known diameter with the reading on
the Bourdon gauge.
Working with a PC connection, the control box is the The apparatus allows students to determine the
brain of the apparatus. Allowing simultaneous control accuracy of the Bourdon gauge and highlights the
of 2 pumps, while taking readings from 2 flow and 2 limitations of using these devices.
pressure sensors, the LCD screen gives students an FUNDAMENTAL FLUIDS
instantaneous readout. The readings are passed from
the control box to the PC software, which plots results
for student analysis. The data can also be logged and
loaded into Excel for further investigation by students. Multitube Manometer
FUNDAMENTAL FLUIDS
The multitube manometer module permits
comparative pressure measurement between 0 and
120mm of water (0-1200Pa).
The module features:
• Three input pressure ports at the bottom, each
Pump Module connecting to a single vertical limb.
• One reference pressure port that is common to all FUNDAMENTAL MECHANICS
The Pump module has an operating voltage of 6-24v three limbs at the top.
and produces a free-flow flow rate of 13 litres/min. It
works alongside the control box, to pump water around • A pipette filler (supplied) as a convenient method of
the apparatus. It features brass connection points for applying a reference pressure to the top pressure
increased longevity port.
The pressure ports are self-sealing, push-in fittings and
FUNDAMENTAL MECHANICS
connections are made using 4mm push-in pneumatic
tubing. This allows direct comparative measurements
to be made between the three input pressure ports.

Differential Pressure Sensor

The Differential pressure sensor module is used to U-Tube & Inclined Manometer
measure pressure in the fluid circuits, it features:
• True wet/wet differential sensing The U-tube and inclined manometer has a measurement
• Easy-to-use, built-in air bleeding system range of 0-110mm.
• Pressure sensing range 0-30 PSI (0-200000 Pa) 4mm tubing is attached to the pressure ports using
• Robust construction, simple push fit fittings using easy-to-use push-in fittings. The inclined manometer
indexes to positions at 30°,60° and 90° from horizontal.
4mm tube

20 Copyright © 2023 Matrix Technology Solutions Limited Copyright © 2023 Matrix Technology Solutions Limited 21