Page 39 - Aerospace Training Range Brochure 2023 WEB

Digital Techniques in Aviation BL2976

This package is designed for students working towards EASA part 66 – module 5: Digital Techniques. The MODULE 2.0
solution consists of a set of microcontroller based training hardware based on our E-blocks system including
a PICmicro programmer board, general purpose input output board, motors training board and a CAN bus
MODULE 2.0
communications interface. Students firstly use our Flowcode software to develop simple programs, compile
and send them to the microcontroller hardware. Then students look at pre-written programs to understand
how more complex systems are developed. Lastly students use prewritten programs to interface the hardware
to our Electronic Flight Information System trainer using CAN bus to understand how larger more complex MODULE 3.0
aircraft systems are developed. By following this process students learn how digital microcontroller and
microprocessor based systems and peripherals function in a modern, relevant and motivating environment.
MODULE 3.0
An 80 page manual is included. Requires Flowcode software. This is a student centered course that will take
around 10 hours to complete. MODULE 4.0

MODULE 4.0

MODULE 5.0
MODULE 5.0

MODULE 8.0
Ghost & Flowcode MODULE 8.0
MODULE 5.0 Requires Flowcode which must be ordered separately MODULE 11.0
provide:
• In-Circuit-Test
• In-Circut-Debug
• Software oscilloscope
• Packet decoder
• Logic Analyzer
MODULE 11.0
DIGITAL TECHNIQUES/ LEARNING OBJECTIVES & EXPERIMENTS:

ELECTRONICS • Decimal, binary, hexadecimal • LED indicators, 7-segment LED
• Microcontroller chips and types
displays
• Microcontroller technology: CPU,
• Switches - push to make and slide
ROM, RAM, ALU, inputs, outputs,
• Serially addressed LCD displays
INSTRUMENTATION • Microcontroller circuits and • Potentiometers and sensors
clock, internal peripherals
• PWM control of motors, stepper
systems
motors, servo motors,
• Microcontroller programming:
• Flow chart programming • Microcontroller communications
and multiplexing
techniques • Digital to Analogue conversion and
Module 5.0 covers multiple subjects, including computers and microprocessors, • Inputs, Outputs, Delays, IF...THEN, Analogue to Digital conversion
digital techniques and Electronic Flight Instrument Systems (EFIS). We have developed While, Goto points, Calculations, • CAN bus for communications
Decisions, Subroutines
two sets of equipment which cover many of these key principles. These systems • Compilers, Assemblers, Linkers SCAN TO VISIT
are controlled through our software package, Flowcode, which is a professional • Variables, open loop control, closed PRODUCT PAGE
development environment that allows engineers to develop microcontroller based loop control
systems through graphical programming.

38 Copyright © 2023 Matrix Technology Solutions Limited Copyright © 2023 Matrix Technology Solutions Limited 39