Page 37 - Aerospace Training Range Brochure 2023 WEB
P. 37
EASA Electrical and Electronic Fundamentals (modules 3 and 4) LK9672 Motor Control CT9513
This comprehensive solution is designed to fulfil the learning requirements of the European Safety Agency The system consists of a powerful DC motor mounted on a rugged frame. A disc with captive nuts is attached MODULE 2.0
(EASA) module 3 - electrical fundamentals - for aircraft maintenance engineers. The solution contains all the to the DC motor and students are able to screw in 100-gram weights to different parts of the disc to alter the
Locktronics parts needed as well as 4 separate workbooks covering each of the sub-modules in the EASA characteristics of the system. A single weight at 0 degrees forms an inverting pendulum.
MODULE 2.0
specification. MODULE 3.0
MODULE 3.0
MODULE 4.0
MODULE 4.0
MODULE 5.0
MODULE 8.0
MODULE 8.0
MODULE 11.0
MODULE 11.0
ANSI version also available LK9672A MODULE 5.0
LEARNING OBJECTIVES & EXPERIMENTS: LEARNING OBJECTIVES & EXPERIMENTS:
This kit includes all of the learning objectives • Transformer losses
included in LK9282 plus the following: • AC measurements • Understanding the drive • Zeigler Nichols algorithm
• Series and parallel circuits • Inductance and capacitance • Understanding the sensors • Integral wind up
• Measuring voltage and current • LR and CR series AC circuits • On/Off control systems • Derivative filter
• Cells and batteries • LCR series AC circuits • System time constant • Manual tuning
• Thermocouples • LR and CR parallel AC circuits • PI controller • Servo pendulum - angle control
• Photocells • LCR parallel AC circuits • PID controller
• Ohm’s law • Q factor and bandwidth
• Low pass and high pass filters
• Resistors in series and in parallel • Band pass and band stop filters
• Series/parallel networks
• Voltage and current dividers
• Kirchoff’s laws
• Power in DC circuits
• Power transfer SCAN TO VISIT SCAN TO VISIT
PRODUCT PAGE PRODUCT PAGE
• Capacitors and electrostatics
• Inductors and inductance
• DC motors
• Generator principles
• Transformers and their
construction
36 Copyright © 2023 Matrix Technology Solutions Limited Copyright © 2023 Matrix Technology Solutions Limited 37