HI
Have started messing around with the Sim components and found a problem.
I have enclosed a very simple chart with both a simulation slider, knob and LED. The LED turns on when knob value gets above 100 all good. Now if you replace the knob with the slider nothing happens.
Am I doing something wrong or does the slider sim component have a problem?
Thanks
Possible SIM Slider problem
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Possible SIM Slider problem
Hello,
Thanks for letting us know yes it does appear to have a problem so I will investigate for you.
The Dash Scale components should do the same thing and work correctly.
Thanks for letting us know yes it does appear to have a problem so I will investigate for you.
The Dash Scale components should do the same thing and work correctly.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel