After update to 8.2 ?
Moderator: Benj
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
After update to 8.2 ?
Hi!
After update to Ver. 8.2 I opened a project I have made in Ver. 8.1 for continue programming, but after update, my 2D dashboard look strange, and I lost all the text??
I have tryed to restart FC several time, but nothing help. Is there somewhere I have to "refresh" something.
Br Jorgen
ADD. Same problem when I started a new project. I have an another pc with path 8.2 update, No problem.
After update to Ver. 8.2 I opened a project I have made in Ver. 8.1 for continue programming, but after update, my 2D dashboard look strange, and I lost all the text??
I have tryed to restart FC several time, but nothing help. Is there somewhere I have to "refresh" something.
Br Jorgen
ADD. Same problem when I started a new project. I have an another pc with path 8.2 update, No problem.
- Attachments
-
- Dashboard.PNG
- (87.33 KiB) Downloaded 3911 times
-
- Posts: 28
- Joined: Wed Sep 26, 2018 2:15 pm
- Has thanked: 3 times
- Been thanked: 3 times
- Contact:
-
- Posts: 28
- Joined: Wed Sep 26, 2018 2:15 pm
- Has thanked: 3 times
- Been thanked: 3 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: After update to 8.2 ?
Hello,
Hopefully this forum topic will help.
viewtopic.php?f=76&t=20993&p=94107
Let us know how you get on.
Hopefully this forum topic will help.
viewtopic.php?f=76&t=20993&p=94107
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Steve
- Matrix Staff
- Posts: 3427
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: After update to 8.2 ?
If Ben's topic doesn't help, then please PM me with the programs and I will have a look. There have been some changes behind the scenes with the 2D panel and your projects will help me determine what is going on.
Regards,
Steve.
Regards,
Steve.
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Hi Ben and Steve!
At the moment I am in germany for job. I am back
tomorrow and I try Bens suggest and you hear from
me. Thank’s for action.
Br Jorgen
At the moment I am in germany for job. I am back
tomorrow and I try Bens suggest and you hear from
me. Thank’s for action.
Br Jorgen
-
- Posts: 155
- Joined: Thu Feb 10, 2011 4:39 am
- Location: Las Vegas, Nevada USA
- Has thanked: 40 times
- Been thanked: 19 times
- Contact:
Re: After update to 8.2 ?
I am having the same problem. I did an update this morning and my 2D panel no longer works with LED. The Generic, single LED does not exist anymore and what is left does not simulate.
A simple program to flash a LED at 1 second increments.
I did the suggested Local size change as Benji stated above.
Please help as I am dead in the water and cannot proceed.
Larry
Disregard this post, I did what Benji suggested in a earlier post and now all is good -- so far.
Larry
A simple program to flash a LED at 1 second increments.
I did the suggested Local size change as Benji stated above.
Please help as I am dead in the water and cannot proceed.
Larry
Disregard this post, I did what Benji suggested in a earlier post and now all is good -- so far.
Larry
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Hi MM!
Unfortunaly i did not help. The problem for me is not the size, But my window look strange and miss test, and look different.
I tryed to follow Ben`s advice, but it only adjust the size, not change the component.
The component still look like in my att. picture in my first post.
Br Jorgen
.
Unfortunaly i did not help. The problem for me is not the size, But my window look strange and miss test, and look different.
I tryed to follow Ben`s advice, but it only adjust the size, not change the component.
The component still look like in my att. picture in my first post.
Br Jorgen
.
- Steve
- Matrix Staff
- Posts: 3427
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: After update to 8.2 ?
Hi Jorgen,
Please attach (or PM) your Flowcode program so I can help solve your problem.
Regards,
Steve.
Please attach (or PM) your Flowcode program so I can help solve your problem.
Regards,
Steve.
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Hi Steve!
Hereby my program for a grassmover. (It work in real world )
do you think it can help? because, so, then what about all my other program and I have the same issue and even when I create a new project.
Ok I have an another laptob And there is no problem, but when I use my laptob I use in my workbench it doesn´t work ** After update**.
Br Jorgen
Hereby my program for a grassmover. (It work in real world )
do you think it can help? because, so, then what about all my other program and I have the same issue and even when I create a new project.
Ok I have an another laptob And there is no problem, but when I use my laptob I use in my workbench it doesn´t work ** After update**.
Br Jorgen
- Attachments
-
- GrasmoverMega1.9.fcfx
- (66.16 KiB) Downloaded 223 times
- Steve
- Matrix Staff
- Posts: 3427
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: After update to 8.2 ?
Hi Jorgen,
Thanks for the file. We've discovered the issue and there is a quick workaround - set the Graphics Engine to "OpenGL hardware" (this is in the "Application" tab of "Global Options").
We'll hopefully find a fix for the software mode over the next week or so, but for now the workaround above should solve your immediate problem.
Regards,
Steve.
Thanks for the file. We've discovered the issue and there is a quick workaround - set the Graphics Engine to "OpenGL hardware" (this is in the "Application" tab of "Global Options").
We'll hopefully find a fix for the software mode over the next week or so, but for now the workaround above should solve your immediate problem.
Regards,
Steve.
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Hi again Steve!
Sorry, your suggest also not change anything. Look forward to hear from you.
Br Jorgen
Sorry, your suggest also not change anything. Look forward to hear from you.
Br Jorgen
- Steve
- Matrix Staff
- Posts: 3427
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: After update to 8.2 ?
Hi Jorgen,
That's strange. We managed to replicate the problem with your program on a few PCs here.
Did you restart Flowcode and/or your PC? Also, when you restarted Flowcode, has the setting in Global Options permanently changed to the hardware mode?
Regards,
Steve.
That's strange. We managed to replicate the problem with your program on a few PCs here.
Did you restart Flowcode and/or your PC? Also, when you restarted Flowcode, has the setting in Global Options permanently changed to the hardware mode?
Regards,
Steve.
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Hi Steve!
After change FC want to restart. I did this, but not restart the PC. I will try again and then restart the pc. You hear in few minute.
Jorgen
After change FC want to restart. I did this, but not restart the PC. I will try again and then restart the pc. You hear in few minute.
Jorgen
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Sorry not Steve. Restart FC and restart PC still the same. Before update, no problem..
Br Jorgen
Br Jorgen
- Steve
- Matrix Staff
- Posts: 3427
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: After update to 8.2 ?
Hi Jorgen,
That's strange - the problem we identified here only affects the OpenGL Software mode. Perhaps the Hardware more on your PC is not available or there is another problem preventing this.
This will not be simple for us to solve, so you should either use your other PC or install the earlier version of Flowcode. We'll try to get a fix out to you next week.
Regards,
Steve.
That's strange - the problem we identified here only affects the OpenGL Software mode. Perhaps the Hardware more on your PC is not available or there is another problem preventing this.
This will not be simple for us to solve, so you should either use your other PC or install the earlier version of Flowcode. We'll try to get a fix out to you next week.
Regards,
Steve.
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
Re: After update to 8.2 ?
Hi Jorgen
I once had similar problems.
Not only with flowcode but with other graphics programs as well.
I had to remove my old graphiccard (radeon) and install a Nvidia graphics card. Only a cheap gtx1050.
FC8.2 works fine on my two computers.
Maybe you have an integrated Intel UHD Graphics 630 processor graphics where you can change and test.
regards
Stefan
I once had similar problems.
Not only with flowcode but with other graphics programs as well.
I had to remove my old graphiccard (radeon) and install a Nvidia graphics card. Only a cheap gtx1050.
FC8.2 works fine on my two computers.
Maybe you have an integrated Intel UHD Graphics 630 processor graphics where you can change and test.
regards
Stefan
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Hi Stefan!
Many thanks for your kind and suggest. After running and install the path 8.2 I have no problems with either FC 5 6 7 and before I downloaded the path to FC8.2 there have been no problems at all. The problem came after installing FC8.2 so and now it´s only in FC8.2. I have also no problem´s with other kind of my software.
I don't think it can be the hardware, in my opinion there must be something about FC8 8.2
Honestly, this is very strange, for the other PC I have no problems with FC8.2, and again it came after update, so????
Steve promised to investigate next week, hopefully he can do magic
Nice weekend-
Jorgen
Many thanks for your kind and suggest. After running and install the path 8.2 I have no problems with either FC 5 6 7 and before I downloaded the path to FC8.2 there have been no problems at all. The problem came after installing FC8.2 so and now it´s only in FC8.2. I have also no problem´s with other kind of my software.
I don't think it can be the hardware, in my opinion there must be something about FC8 8.2
Honestly, this is very strange, for the other PC I have no problems with FC8.2, and again it came after update, so????
Steve promised to investigate next week, hopefully he can do magic
Nice weekend-
Jorgen
- Steve
- Matrix Staff
- Posts: 3427
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: After update to 8.2 ?
Hi Jorgen,
There are a few bits of information I need from you to proceed, which you can find by using a tool such as Realtech VR's OpenGL Extensions Viewer:
http://realtech-vr.com/admin/glview
Specifically, I need to know the version of OpenGL used on the problem PC and information about its capabilities. Here's a picture of the GL Report screen:
At the top of the image, there are 2 buttons for saving the report (as text or as XML). If you can save that report and then post it here (or PM it to me) it will be a big help in solving this problem.
Regards,
Steve.
There are a few bits of information I need from you to proceed, which you can find by using a tool such as Realtech VR's OpenGL Extensions Viewer:
http://realtech-vr.com/admin/glview
Specifically, I need to know the version of OpenGL used on the problem PC and information about its capabilities. Here's a picture of the GL Report screen:
At the top of the image, there are 2 buttons for saving the report (as text or as XML). If you can save that report and then post it here (or PM it to me) it will be a big help in solving this problem.
Regards,
Steve.
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Hi Steve!
Thank`s a lot. I am not home before wednesday afternoon, then I Will do what you suggest.
You hear. Thank`s.
Br Jorgen
Thank`s a lot. I am not home before wednesday afternoon, then I Will do what you suggest.
You hear. Thank`s.
Br Jorgen
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Hi Steve!
Hereby the report.
Thank´s in advance.
Hereby the report.
Thank´s in advance.
- Attachments
-
- OpenGlReport.txt
- (2.31 KiB) Downloaded 132 times
- Steve
- Matrix Staff
- Posts: 3427
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: After update to 8.2 ?
Thanks, Jorgen.
This file should solve your problem:
https://matrixts-my.sharepoint.com/:u:/ ... Q?e=2tfRTo
You will need to rename the extension to .exe, and then replace the existing FlowcodeV8.exe file on your PC (you may want to make a copy of the current EXE first).
Please let me know if this works for you.
Regards,
Steve.
This file should solve your problem:
https://matrixts-my.sharepoint.com/:u:/ ... Q?e=2tfRTo
You will need to rename the extension to .exe, and then replace the existing FlowcodeV8.exe file on your PC (you may want to make a copy of the current EXE first).
Please let me know if this works for you.
Regards,
Steve.
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: After update to 8.2 ?
Hi steve!
Oh my god, as I have told before, you MM guy´s and Valued C can do magic
After rename and replase, I start FC and Windows came up first time and make nonsense, next time no problem and the dashboard look normal
again, perfect. What was wrong ?
I know it is an old PC, but working very well.
Hopefully it had no influence on my project if I move my project from one laptob to another and opposite. Sometime I start a project on the one PC and maybe continue on another PC later?
I am really gratefull, and thank´s Steve.
Br Jorgen
Oh my god, as I have told before, you MM guy´s and Valued C can do magic
After rename and replase, I start FC and Windows came up first time and make nonsense, next time no problem and the dashboard look normal
again, perfect. What was wrong ?
I know it is an old PC, but working very well.
Hopefully it had no influence on my project if I move my project from one laptob to another and opposite. Sometime I start a project on the one PC and maybe continue on another PC later?
I am really gratefull, and thank´s Steve.
Br Jorgen