Hallo steve , benj certainly also sean !
rb0/int0 .... rb2/int2 work ok , but rb3/int3 it works not.(I change the int in the same program)
Please help.
...............
The 18f8722.h is not updatet in the new version. #define trisi trisj
#define porti portj
...............
your tip "Custom characters to HD44780 LCD" works fantastic! much thanks.
Regards wolfgang
rb3/int3 18f8722
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
- Steve
- Matrix Staff
- Posts: 3426
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: rb3/int3 18f8722
How does INT3 not work? I.e. simulation, or in hardware, or both?
Also, have you tried INT4 and found the same problem?
Also, have you tried INT4 and found the same problem?
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
Re: rb3/int3 18f8722
Hallo steve
On my board the int0 to int3 work ok.
In flowcode simulation int3 does not work.
I cannot find int4,there is KBI0 pin 53 .....
Regards wolfgang
On my board the int0 to int3 work ok.
In flowcode simulation int3 does not work.
I cannot find int4,there is KBI0 pin 53 .....
Regards wolfgang
- Steve
- Matrix Staff
- Posts: 3426
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: rb3/int3 18f8722
I have only implemented the simulation of INT0, INT1 and INT2 within Flowcode, which explains your problem.
-
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
Re: rb3/int3 18f8722
Hallo steve
I have this int3 , please lock the picture in my mail to you.
Regards wolfgang
I have this int3 , please lock the picture in my mail to you.
Regards wolfgang
- Steve
- Matrix Staff
- Posts: 3426
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: rb3/int3 18f8722
Simulation works in a different way, and it has only been implemented for INT0 to INT2.
You should be able to get INT3 to work on your hardware, but it will not work during simulation.
You should be able to get INT3 to work on your hardware, but it will not work during simulation.