USB Pic32
Moderator: Benj
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
USB Pic32
hi
I wrote a simple program, just initialise the USB (as serial) and send every 3second a "hallo" and led a LED flash.
Compiele und run in the harware is working.
I can generate a usb driver.
But when I connect the USB-cable to the Computer (win7) I can not see a USB Device.
The hardware is an PIC32-PINGUINO-MICRO-REV-B from Olimex.
the controller is an:
Pic32MX440F256H
I wrote a simple program, just initialise the USB (as serial) and send every 3second a "hallo" and led a LED flash.
Compiele und run in the harware is working.
I can generate a usb driver.
But when I connect the USB-cable to the Computer (win7) I can not see a USB Device.
The hardware is an PIC32-PINGUINO-MICRO-REV-B from Olimex.
the controller is an:
Pic32MX440F256H
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: USB Pic32
Hello,
We have not yet tackled USB on the PIC32 range. It is on the list and should hopefully be coming soon hopefully along with other USB improvements.
The USB component info tooltip should help you to know which device families are supported.
We have not yet tackled USB on the PIC32 range. It is on the list and should hopefully be coming soon hopefully along with other USB improvements.
The USB component info tooltip should help you to know which device families are supported.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: USB Pic32
This is bad news for me too,I am developing a low pin count Low cost USB board for PIC32 and was hoping to proto type with FC7Benj wrote:We have not yet tackled USB on the PIC32 range
Have good one
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: USB Pic32
I'll see if I can bump this one up the list.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: USB Pic32
Hi Team,stefan.erni wrote: Is it on the list ?
Or do you have a good idea how to use the usb on PIC 32?
I am just as excited as Stephan regarding the PIC32 USB stuff
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: USB Pic32
I started to look into this last week. I got slightly further but still not happy with it just yet. Hopefully find some more time this week to finish it off.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
-
- Posts: 39
- Joined: Sat Jul 16, 2016 12:08 pm
- Has thanked: 4 times
- Been thanked: 2 times
- Contact:
Re: USB Pic32
Hello,
Also has a problem.
FVBUSONION can not be changed to
Controlled by the USB Module
It bounces back.
Win 10 64Bit
Sincerely Uwe
Also has a problem.
FVBUSONION can not be changed to
Controlled by the USB Module
It bounces back.
Win 10 64Bit
Sincerely Uwe
- Attachments
-
- Konfig.PNG
- (23.21 KiB) Downloaded 5913 times
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
-
- Posts: 39
- Joined: Sat Jul 16, 2016 12:08 pm
- Has thanked: 4 times
- Been thanked: 2 times
- Contact:
Re: USB Pic32
Moin,
ja, ich benutze einen PIC32.
Ich habe es mit verschiedenen PIC32 versucht.
PIC18F2550 habe ich zum laufen bekommen.
Ich benutze USB CDC.
mit freundlichem Gruß
Uwe
Tel 04499386300
ich rufe gerne zurück
Hello,
Yes, I use a PIC32.
I have tried it with different PIC32.
PIC18F2550 I got to run.
I use USB CDC.
Sincerely
Uwe
ja, ich benutze einen PIC32.
Ich habe es mit verschiedenen PIC32 versucht.
PIC18F2550 habe ich zum laufen bekommen.
Ich benutze USB CDC.
mit freundlichem Gruß
Uwe
Tel 04499386300
ich rufe gerne zurück
Hello,
Yes, I use a PIC32.
I have tried it with different PIC32.
PIC18F2550 I got to run.
I use USB CDC.
Sincerely
Uwe
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
Re: USB Pic32
Hi Uwe
Usb with Pic 32 is not jet working with flowcode7. Thats what I understand
I hope soon we have a "trial" version.
04499386300
is this number correct?
regards
Stefan
Usb with Pic 32 is not jet working with flowcode7. Thats what I understand
I hope soon we have a "trial" version.
04499386300
is this number correct?
regards
Stefan
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: USB Pic32
Hi Uwe and Stephan
In my understanding too FC7 USB for PIC32 is not working yet however have seen some post by Ben that he is progressing on this so i guess it will be there in the near future
I am also waiting for PIC32 USB support blocks
Gruss
QMESAR
In my understanding too FC7 USB for PIC32 is not working yet however have seen some post by Ben that he is progressing on this so i guess it will be there in the near future
I am also waiting for PIC32 USB support blocks
Gruss
QMESAR
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR