Dears,
May I use all peripherals below board by Flowcode 6 Arm module ?
For example; I want to read quadrature encoder in 45sec. and keep the data in sram then pack and send all the data via rs232 to a pc, is it possible to this with Flowcode 6 Arm module ?
Should I need Usb programmer or Jtag programmer ?
Scheme of AT91SAM7SE-HB ==> http://www.bravekit.com/document/ATMEL_ ... ematic.pdf
Example of accessing to "sram" CY62157EV30 ==> http://www.bravekit.com/document/ATMEL_ ... _atlib.zip
Pictures of the board:
http://www.bravekit.com/image/data/AT91 ... 7SE_HB.jpg
http://www.bravekit.com/image/data/AT91 ... HB_bot.jpg
Thanks in Advance,
Thomas
AT91SAM7SE-HB-SRAM progr. by FLOWCODE 6
-
- Posts: 7
- Joined: Tue Mar 11, 2014 9:45 pm
- Been thanked: 1 time
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: AT91SAM7SE-HB-SRAM progr. by FLOWCODE 6
Hello Thomas,
Yes that all sounds possible. If your new to the Flowcode environment then I would look through the on-line help and the beginners course to help get you started.
http://www.matrixmultimedia.com/wiki/in ... =Main_Page
Yes that all sounds possible. If your new to the Flowcode environment then I would look through the on-line help and the beginners course to help get you started.
http://www.matrixmultimedia.com/wiki/in ... =Main_Page
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 7
- Joined: Tue Mar 11, 2014 9:45 pm
- Been thanked: 1 time
- Contact:
Re: AT91SAM7SE-HB-SRAM progr. by FLOWCODE 6
Thank you for your kind response.
I'm little investigate that AT91SAM7SE Microcontroller almost 7 years old Arm Core.
I dont think Atmel will produce much longer then eg.10 years.
Unfortunately, I decided to cancel my Flowcode journey with Atmel micros.
Do you have any plan for another 32 bit micro support, eg. Stm32, Pic32 etc. ?
If yes, I would love to continue on my project with Flowcode.
I'm little investigate that AT91SAM7SE Microcontroller almost 7 years old Arm Core.
I dont think Atmel will produce much longer then eg.10 years.
Unfortunately, I decided to cancel my Flowcode journey with Atmel micros.
Do you have any plan for another 32 bit micro support, eg. Stm32, Pic32 etc. ?
If yes, I would love to continue on my project with Flowcode.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: AT91SAM7SE-HB-SRAM progr. by FLOWCODE 6
Hello,
Yes there are plans for additional 32-bit devices, PIC32 is likely a quick win but we also are looking at some of the newer and more powerful ARM devices.
Yes there are plans for additional 32-bit devices, PIC32 is likely a quick win but we also are looking at some of the newer and more powerful ARM devices.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel