If changed to Hitec (lite or evauation pro mode) then wrong characters are displayed and CR function not working either.
Any way around this please?
Code: Select all
File name: M:\Flowcode Testing\TestRS232.c
Generated by: Flowcode v4.3.7.63
Date: Monday, March 28, 2011 23:11:00
Licence: Professional
Registered to: Martin
http://www.matrixmultimedia.com
Launching the compiler...
C:\Program Files (x86)\HI-TECH Software\PICC\9.80\bin\picc.exe --CHIP=16F88 -N48 TestRS232.c
TestRS232.c: main()
909: FCD_RS2320_SendRS232String("Seconds:",8);
^ (359) illegal conversion between pointer types (warning)
pointer to const unsigned char -> pointer to unsigned char
919: FCD_RS2320_SendRS232String(" ",3);
^ (359) illegal conversion between pointer types (warning)
pointer to const unsigned char -> pointer to unsigned char
930: FCD_RS2320_SendRS232String("AN0:",4);
^ (359) illegal conversion between pointer types (warning)
pointer to const unsigned char -> pointer to unsigned char
..................
(1273) Omniscient Code Generation not available in Lite mode (warning)
HI-TECH C Compiler for PIC10/12/16 MCUs (Lite Mode) V9.80
Copyright (C) 2010 Microchip Technology Inc.
Memory Summary:
Program space used 416h ( 1046) of 1000h words ( 25.5%)
Data space used 45h ( 69) of 170h bytes ( 18.8%)
EEPROM space used 0h ( 0) of 100h bytes ( 0.0%)
Configuration bits used 2h ( 2) of 2h words (100.0%)
ID Location space used 0h ( 0) of 4h bytes ( 0.0%)
Running this compiler in PRO mode, with Omniscient Code Generation enabled,
produces code which is typically 40% smaller than in Lite mode.
The HI-TECH C PRO compiler output for this code could be 408 words smaller.
See http://microchip.htsoft.com/portal/pic_pro for more information.
Return code = 0
Launching the linker/assembler...
C:\Program Files (x86)\Matrix Multimedia\Flowcode V4\Tools\DoNothing\DoNothing.exe
Return code = 0
Launching the programmer...
C:\Program Files (x86)\Matrix Multimedia\Flowcode V4\tools\PPP\PPPv3.exe -cs 2 -chip PIC16F88 -nogui "TestRS232.hex"
Sending program...
Erasing the PICmicro
NOTE: EEPROM data will also be erased!
Writing program memory
Writing configuration memory
Writing id-locations
Reading program memory
Reading configuration memory
Finished reading PICmicro contents
Program sent and verified OK
1048 out of 4096 program words used
0 out of 256 data bytes used
That took 2.121 seconds
Return code = 0
FINISHED