Programming an OLED colour display

For questions and comments on programming in general. And for any items that don't fit into the forums below.

Moderators: Benj, Mods

Post Reply
Chris_MIRA
Posts: 186
Joined: Wed Jan 23, 2013 3:43 pm
Has thanked: 2 times
Been thanked: 21 times
Contact:
Contact Chris_MIRA

Programming an OLED colour display

Post by Chris_MIRA »

Hi,
Sorry if this is covered else where or is just "obvious", I want to programme / drive an OLED colour display using Arduino Nano, probably control via SPI. Which (if any) of the FC7 display macro options do you recommend I use? Does anyone know if more OLED component macros are intended to be produced for FC7? :) :D

Regards,
Chris
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: Programming an OLED colour display

Post by Benj »

Hi Chris,

The EBM001 display is nice :D

Otherwise the SSD displays are usually fairly well behaved.

What other displays would you like to see? If you have a display in mind and can send us a sample for us to play with then I might be able to work this in for you.
Top
Post Reply

Return to “General Programming”