Hi,
Sorry if this is covered else where or is just "obvious", I want to programme / drive an OLED colour display using Arduino Nano, probably control via SPI. Which (if any) of the FC7 display macro options do you recommend I use? Does anyone know if more OLED component macros are intended to be produced for FC7?
Regards,
Chris
Programming an OLED colour display
-
- Posts: 186
- Joined: Wed Jan 23, 2013 3:43 pm
- Has thanked: 2 times
- Been thanked: 21 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Programming an OLED colour display
Hi Chris,
The EBM001 display is nice
Otherwise the SSD displays are usually fairly well behaved.
What other displays would you like to see? If you have a display in mind and can send us a sample for us to play with then I might be able to work this in for you.
The EBM001 display is nice
Otherwise the SSD displays are usually fairly well behaved.
What other displays would you like to see? If you have a display in mind and can send us a sample for us to play with then I might be able to work this in for you.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel