Page 21 - Electrical & Electronic Engineering Brochure 2024 WEB
P. 21
Electrical Machines EM6637-2 Electrical Machines EM6637-2
PC Software FLOWCODE
Motors The system is designed to be used manually or via connection to a laptop or PC. When utilising the PC control
FLOWCODE
option, the user should download the app from the Resources page on the website. Below are a range of
DC Dynamometer / Motor and screenshots showcasing the ways the proprietary software can be used to control each type of machine in
Cradle the range.
• Operating voltage – 24V SYSBLOCKS
• Max current - 2A Through experimentation, users can review the results of altering the voltage, load etc of each machine and
• Speed - 1500rpm the subsequent effect this has on each machine’s current, torque etc. over time.
SYSBLOCKS
The aluminium cradle which houses our dynamometer features a rugged and safe sliding mechanism into ELECTRICAL MACHINES
which each of the other six motors in the range fix into position. The motor coupling meets the dynamometer
in a protected housing and allows for safe study of each machine type at 24 volts. When using our system in
manual mode, it is likely you will require two (per set) HP1324 Fluke 115 True RMS Digital Multimeter and one
ELECTRICAL MACHINES
HP8067 Tektronix Digital oscilloscope. Three phase control software with integrated oscilloscope. Close up of oscilloscope plot – users can select from one of 14 on-
board instruments.
Three Phase Induction LOCKTRONICS
Motor Shunt Motor
Operating voltage – 24V AC Operating voltage – 24V AC
LOCKTRONICS
Frequency – 40-80Hz Max current – 12A
Max current – 1.4A Speed – 1500rpm
Speed – 1400rpm EBLOCKS 2
EBLOCKS 2
Gauges show key values such as current and voltage. Set output frequency and waveform type – in this case digital or
Single Phase Induction pseudo-sine. ALLCODE
Motor Universal / Series Motor
ALLCODE
Operating voltage – 24V AC Operating voltage – 24V AC
Frequency – 40-80Hz Frequency – 50Hz
Max current – 1.4A Max current – 6A
Speed – 1400rpm Speed – 1500rpm TINA
TINA
Brushless DC Motor /
DC Motor/Dynamo 3 Phase Generator Software allows you to monitor RPM and torque in real time. Automatic speed torque graph for any of the machines can
be generated by the software.
Operating voltage – 24V AC Operating voltage – 24V AC
Frequency – 40-80Hz 3 Phase Software Requirements
Processor: 1Ghz or faster
•
Speed – 1500rpm Max current – 2A • RAM: 1Gb or more
Speed – 1500rpm • HDD Space: 1Gb
• OS: 32 or 64bit Windows 7, 8, 10 or 11
• Display: Recommended minimum (1920 by 1080) full HD
20 Copyright © 2023 Matrix Technology Solutions Limited Copyright © 2023 Matrix Technology Solutions Limited 21