Page 29 - Aerospace Training Range Brochure 2023 WEB

Electrical Machines EM6637-2 Electrical Machines EM6637-2

PC Software MODULE 2.0
Motors The system is designed to be used manually or via connection to a laptop or PC. When utilising the PC control
MODULE 2.0
option, the user should download the app from the Resources page on the website. Below are a range of
DC Dynamometer / Motor and screenshots showcasing the ways the proprietary software can be used to control each type of machine in
Cradle (1) the range.
• Operating voltage – 24V MODULE 3.0
• Max current - 2A Through experimentation, users can review the results of altering the voltage, load etc of each machine and
MODULE 3.0
• Speed - 1500rpm the subsequent effect this has on each machine’s current, torque etc. over time. MODULE 4.0

MODULE 4.0

The aluminium cradle which houses our dynamometer features a rugged and safe sliding mechanism into
which each of the other six motors in the range fix into position. The motor coupling meets the dynamometer MODULE 5.0
in a protected housing and allows for safe study of each machine type at 24 volts. When using our system in
manual mode, it is likely you will require two (per set) HP1324 Fluke 115 True RMS Digital Multimeter and one
MODULE 5.0
HP8067 Tektronix Digital oscilloscope. Three phase control software with integrated oscilloscope. Close up of oscilloscope plot – users can select from one of 14 on-board
instruments.

Three Phase Induction MODULE 8.0
Motor (2) Shunt Motor (3)
MODULE 8.0
Operating voltage – 24V AC Operating voltage – 24V AC
Frequency – 40-80Hz Max current – 12A
Max current – 1.4A Speed – 1500rpm MODULE 11.0
Speed – 1400rpm

MODULE 11.0

Single Phase Induction Universal (5) / Series (6)
Motor (4) Machine Gauges show key values such as current and voltage. Set output frequency and waveform type – in this case digital or pseudo-sine.

Operating voltage – 24V AC Operating voltage – 24V AC
Frequency – 40-80Hz Frequency – 50Hz
Max current – 1.4A Max current – 6A
Speed – 1400rpm Speed – 1500rpm

Brushless DC Motor (9) /
Synchronous Phase
DC Motor (7) / Dynamo (8) Generator (10)

Operating voltage – 24V AC Operating voltage – 24V AC
Frequency – 40-80Hz 3 Phase
Speed – 1500rpm Max current – 2A
Speed – 1500rpm Automatic speed torque graph for any of the machines can
Software allows you to monitor RPM and torque in real time.
be generated by the software.

28 Copyright © 2023 Matrix Technology Solutions Limited Copyright © 2023 Matrix Technology Solutions Limited 29