Components
From Flowcode Help
Jump to navigationJump to search![]() |
MIAC - Matrix Industrial Automotive Controller |
![]() |
![]() | |
![]() |
An easy way to display the data from up to four console windows on the panel. |
![]() |
A base for drawing scales on a dial or circular meter |
![]() |
A base control for drawing scales on horizontal or vertical strips |
![]() |
A simple LED suitable for simulation that reflects the value of a pin |
![]() |
A simple slider control with divides and interaction |
![]() |
Low level routines for controling the CAN interface either using an external MCP2515 IC and a SPI bus connection |
![]() |
Generic Two Wire I2C Communications Interface |
![]() |
Low level routines for controlling the LIN master interface. |
![]() |
Low level routines for controlling the LIN slave interface. |
![]() |
Low level routines for controlling or interacting with a MIDI interface. |
![]() |
Modbus component for talking to Modbus compatible hardware via RS232 or RS485. |
![]() |
Low level routines for controlling or interacting with a standard one wire interface. |
![]() |
Low level routines for controlling or interacting with a standard asyncronous serial interface. |
![]() |
Low level routines for controlling or interacting with an SPI interface. |
![]() |
Base TCP/IP component with simulation only interface to allow TCP/IP style network communications in simulation. |
![]() |
Component to create and communicate using a standard HID type USB class. |
![]() |
Component to create and communicate using a standard CDC type COM port. |
![]() |
Component to create and communicate using a generic USB communications profile. |
![]() |
A way of interacting with the VISI interface designed by 4D systems. |
![]() |
Webserver component designed to work with the WIZ3100 range of modules from Wiznet. |
![]() |
Webserver component designed to work with the WIZ5100 range of modules from Wiznet. |
![]() |
Low level routines for controlling a standard AT Bluetooth interface. |
![]() |
Component designed to process incoming NMEA style GPS data and convert into meaningful |
![]() |
Low level routines for controlling a standard AT GSM / GPRS interface |
![]() |
Low level routines for controlling a standard IrDA interface. |
![]() |
Low level routines for controlling a standard RC5 IR interface. |
![]() |
A simple RF-ISM communications module based on the Microchip Alpha MRF49XA device. |
![]() |
Low level routines for controlling a RF Solutions RFID interface |
![]() |
Wireless LAN component designed to work with the WIZ610wi module from Wiznet. |
![]() |
Zigbee component designed to work with the XBEE range of modules from Digi. |
![]() |
A button overlay that allows any object to behave like a button |
![]() |
Serial based simulation component for use with systems such as RS232, Bluetooth and USB Serial. |
![]() |
Circular buffer component allowing easy and efficient FIFO style data byte storage. |
![]() |
Takes a single object and produces an array of clones. |
![]() |
A purely cosmetic component to help simplify E-block connections without having to keep referring to the datasheets. |
![]() |
A helper control to query the current FCD file |
![]() |
An LCD control pane supporting up to 64 x 64 units |
![]() |
A control to draw markings on any component |
![]() |
Helper for building components which require simulation of constant motion. |
![]() |
Create an accuractely spaced array of up to eight components, each corresponding to a pin |
![]() |
Simple indicator panel for your dashboard. |
![]() |
14mm seven segment display. |
![]() |
Seven segment display modelled after a standard 14mm high unit. |
![]() |
Base graphical LCD with simulation only interface to allow graphics to be drawn in simulation. |
![]() |
Adafruit OLED LCD display |
![]() |
Generic configurable alphanumeric LCD display component based on the standard Hitachi HD44780 controller IC. |
![]() |
An LED with red, green and blue elements that can be mixed together to produce |
![]() |
Create an evenly spaced array of LED indicators. |
![]() |
Base for creating LEDs and other on/off visual indicators. |
![]() |
LED Matrix component designed to work using multiple data pins and a single clock pin. |
![]() |
LED Matrix component designed to work using a single data and clock pin. |
![]() |
Pulse Width Modulation, a versitile way of generating a digital pulse using mark / space modulation. |
![]() |
A RAM-buffer for monitoring LCD changes |
![]() |
Speech component allowing Phoneme based speech for use on an embedded platform. |
![]() |
Module for animating other objects. |
![]() |
Generates a label for a component. |
![]() |
Automatically generates labels for all panel objects and components. |
![]() |
A base data injector used as a placeholder in components which reference the data injector interface. |
![]() |
Simulation only interface to allow communications with a FTDI USB 232 IC connected to the system. |
![]() |
Support for the Velleman K8055 USB input/output board. |
![]() |
Square analogue panel meter as used in Locktronics. |
![]() |
A set of functions designed for interacting with a 2000 series Pico scope via simulation. |
![]() |
A base for building switches that do not download to chip. |
![]() |
Base ADC component with no graphical interface. |
![]() |
Polls a chosen panel object to see if it has collided with another object. |
![]() |
Generic component to create a raster scanned custom keypad or button matrix. |
![]() |
Polls a chosen panel object to test it's distance from the component. |
![]() |
Create an evenly spaced array of switches. |
![]() |
Base single pin switch with no graphical interface |
![]() |
A low level implementation giving direct access to the CAL |
![]() |
Low level routines for controling the CAN interface |
![]() |
A low level implementation giving direct access to the CAL |
![]() |
A low level implementation giving direct access to the CAL |
![]() |
Chip Abstraction Layer for Two Wire I2C Communications |
![]() |
A low level implementation giving direct access to the CAL |
![]() |
A low level implementation giving direct access to the CAL |
![]() |
A low level implementation giving direct access to the CAL |
![]() |
A purely cosmetic component for creating smoothly radiused bezel or frame to fit around |
![]() |
A cosmetic only representation of the target microcontoller device showing the default package type complete with pins. |
![]() |
A simulation only version of a very basic 3D printer such as a standard RepRap. |
![]() |
LIS3LV02DQ Accelerometer sensor with options for I2C or SPI communications. |
![]() |
LSM303DLHC Combined 6-Axis Accelerometer and Magnetometer sensors |
![]() |
MPU-6050 Combined 6-Axis Accelerometer and Gyroscope sensors. |
![]() |
A component to allow all the features of the Formula Flowcode robot to be investigated. |
![]() |
Base component for constructing continuous motion - e. |
![]() |
Uses InfraRed light to detect if an external object is near to the sensor. |
![]() |
Uses InfraRed light to detect if an external object is near to the sensor. |
![]() |
Quad encoder component implements a rotary encoder connected to two pins |
![]() |
Can control up to eight standard PWM driven servo's. |
![]() |
Base component for creating custom servo motor simulations. |
![]() |
Base component for constructing solenoids. |
![]() |
Enables the creation of a stepper motor component by specifying objects for its appearance. |
![]() |
Allows for several types of control operations to be performed on a buffer. |
![]() |
DSP System main buffer manager responsible for allocating memory, taking care of buffer indexes ... |
![]() |
Allows an adjustable delay to be inserted into the DSP system |
![]() |
Provides functionality to convert frequency domain data into time domain data. |
![]() |
Provides a way of converting a buffer full of time domain data into frequency domain data. |
![]() |
Filter component to allow basic filtering to be performed |
![]() |
A frequency generator component designed to plug into the DSP system component and allow several... |
![]() |
Allows the values from a buffer to be assigned. |
![]() |
Provides a way of intelligently filtering noise from data to allow for better sensor approximations. |
![]() |
Allows for detection and collection of peaks, troughs and averages. |
![]() |
Allows the values from a buffer to be read. |
![]() |
Allows the values in a single buffer to be scaled uniformly. |
![]() |
Component to combine together two buffers into one a index at a time. |
![]() |
A means of reading data from and writing data to the EEPROM memory onboard the microcontroller. |
![]() |
FAT component allowing access to read and write files on a SD, SDHC or MMC card. |
![]() |
A lookup-table component allowing an easy way to place arrays of static data into ROM memory. |