Difference between revisions of "Component: EEPROM (Storage)"
From Flowcode Help
Jump to navigationJump to searchLine 23: | Line 23: | ||
Reads a value from location 0 in the EEPROM and writes back the value incremented by one. | Reads a value from location 0 in the EEPROM and writes back the value incremented by one. | ||
+ | |||
Starting and stopping the simulation or resetting the microcontroller will allow the program to resume counting from where it left off. | Starting and stopping the simulation or resetting the microcontroller will allow the program to resume counting from where it left off. | ||
Revision as of 15:44, 3 December 2013
Author | Matrix Ltd |
Version | 1.1 |
Category | Storage |
Contents
EEPROM component
An EEPROM front end for writing data to persistant storage
Examples
Reads a value from location 0 in the EEPROM and writes back the value incremented by one.
Starting and stopping the simulation or resetting the microcontroller will allow the program to resume counting from where it left off.
Downloadable macro reference
Read
Reads a packet of bits from the EEPROM
The number of bits read is 8 or 16, depending on the platform
Parameters
- UINT Address
- The address, in elements, to read the data from
Return value
Write
Writes a packet of bits from the EEPROM
The number of bits written is 8 or 16, depending on the platform
Parameters
- UINT Address
- The address, in elements, to read the data from
- UINT Value
- The 8 or 16 bit value to store in EEPROM
Return value
- This call does not return a value
Simulation macro reference
This component does not contain any simulation macros
Property reference
This component does not contain any properties