Component: Injector (CAN) (Simulation)
| Author | Matrix Ltd |
| Version | 1.0 |
| Category | Simulation |
| This inherits from Data Injector | |
Contents
Injector (CAN) component
Comms data injector to allow CAN message identifiers to be decoded to specific message strings. Uses an external CSV file to specify the IDs and descriptive strings.
Examples
No additional examples
Downloadable macro reference
This component does not contain any downloadable macros
Simulation macro reference
This component inherits simulation macros from Data Injector
TxByte
Puts a byte onto the comms channel.
CAN packet is inserted into injector like this:
ID3, ID2, ID1, ID0, D7, D6, D5, D4, D3, D2, D1, D0, \n
Parameters
- BYTE DataByte
Return value
- This call does not return a value
RxByte
Attempt to receive a byte back from the injector
This call is provided by Data Injector
Parameters
- This macro has no parameters
Return value
GetTxConsoleHandle
Gets the handle to the console allowing data displaying on the panel etc.
This call is provided by Data Injector
Parameters
- This macro has no parameters
Return value
ChangeState
Changes the state for I2C or SPI type comms where the data bytes along are not enough to go on.
This call is provided by Data Injector
Parameters
- BYTE NewState
- Assigns new state, 0=default
Return value
- This call does not return a value
GetRxConsoleHandle
Gets the handle to the console allowing data displaying on the panel etc.
This call is provided by Data Injector
Parameters
- This macro has no parameters
Return value
InitialiseInjector
Sets up the injector ready to receive commands or send data
Parameters
- <- STRING InjectorName
- Name of the console that will be created
- This parameter may be returned back to the caller
Return value
GetConsoleHandle
Gets the handle to the console allowing data displaying on the panel etc.
Parameters
- BYTE HandleIndex
- Selects which console handle to obtain - 0=ID/Data 1=ID Meanings
Return value
Property reference
Circular Buffer Size
This property is of type Unsigned integer and can be referenced with the variable name CircularBufferSize.
Number of bytes that can be held in the injector's circular buffer
Termination Character
This property is of type Fixed list of ints and can be referenced with the variable name TermChar.
Used to signify the end of a message, in the case of CAN it will end a specific identifier message
CSV ID File
This property is of type Filename and can be referenced with the variable name CSVFile.
Location of comma seperated ID description file.
e.g.
ID,Description
1,Door Open
2,Door Closed
3,Window Open
4,Window Closed
1023,System Disable
1024,System Enable
