|
Hello, in this edition:
-
Attend our 1 day Graphical programming training day and get a Flowcode Professional for dsPIC/PIC24 free
-
How to work with RS485 communications
-
New - dsPIC and PIC 24 multiprogrammer and Flowcode 4 for dsPIC and PIC 24
-
Make your views count with our E-Blocks questionnaire
-
Your articles - readers share over £500 worth of free products given away in February
-
YouTube channel sneak preview
Graphical programming for dsPIC/PIC24 training in the UK - Cost £250
Attend
this hands on 1 day training course and we will provide you with a FREE
Professional version of Flowcode 4 for dsPIC/PIC24 , worth £149. We will:
-
provide insight into dsPIC/PIC24 microcontroller capability
-
show how to program dsPIC/PIC24 microcontrollers with Flowcode
-
create basic and intermediate flowchart programs
-
program E-blocks
-
outline project work using E-blocks and Flowcode
To book your place email justin@matrixmultimedia.co.uk. |
9.30 – 16.30
16 April Halifax
17 May Halifax
11 June Halifax
|
Working with RS485 communications
The EB062 2-channel RS485 E-Block is now available to
support a range of high speed, long distance, wired communication and
signalling applications. This month’s Knowledge Zone
article describes the range of features and configuration options
available. It also includes example programs that allow a small
network of units to be connected together.
"In a previous article we discussed some of the features
of the RS485 communications standard, developing a simple network
protocol using the Flowcode RS232 (UART) component in 9-bit data mode.
The original article was based on prototype hardware, but we now have
the EB062 RS485 E-block which is capable of supporting this, and
many..." read more.
Matrix related product videos
We will soon be launching our Matrix YouTube channel. For a sneak preview of our latest videos, go to:
E-Blocks
MIAC
Locktronics
If you have any product related videos we could add to the channel then why not email justin@matrixmultimedia.co.uk.
New - dsPIC and PIC 24 multiprogrammer and Flowcode 4 for dsPIC and PIC 24
This dsPIC/PIC24 microcontroller multiprogrammer connects to your PC
via USB and can be used with Flowcode and most third party compilers.
The board will program a wide range of 18, 20, 28 and 40 pin PICmicro
microcontroller devices from the PIC24F, PIC24H, dsPIC30 and dsPIC33
series. Our new version of Flowcode has all the standard functionality you will find in our PIC, ARM and AVR products with some updated components and advanced customisation. For a low cost dsPIC, PIC 24 and E-Blocks kit, click here (EB655SI4).
Remember if you already have a copy of Flowocde, you may get up to 50% discount using the crossgrade option.
|
|
Make your views count
Following
the fantastic response to our last questionnaire on Flowcode V5, we
have compiled a set of questions to get feedback from our E-block users.
We always value feedback from our users, and this is the perfect way to
have your say and influence the features that will appear in future
versions of E-blocks.
The online questionnaire will take only a few minutes to complete and one lucky respondent will receive £200 worth of free Matrix hardware or software.
Your articles - readers share over £500 worth of free products given away in February
We are always looking for interesting and
useful articles to help users get the most out of our products.
This month, we have 3 articles to tell you about that have been written
by newsletter readers.
How to apply a RFID Security system (by “misoct”).
Make a LCD bar graph with a E-blocks Graphical display (EB058) (by “Harry Tuttle”).
Make your own PIR E-block (by “JohnCrow”).
If you would like the chance to receive some
free products, please contact us with your ideas and suggestions.
Find out about
Distributors
If you live outside the UK, click on the link to find your local distributor.
Contact us
If you need any help finding the right product simply look through our datasheets at www.matrixmultimedia.com or phone one of our experts on: 0044 1422 252 383.
Professional demonstration
If you would like to know what's new and
how Matrix can help develop your training course or add value to your
business, then why not email justin@matrixmultimedia.co.uk to learn more about our free demonstrations.
|
Forward this message to a friend
Click here to sign up to e bulletin
|
|
|
|
|
|