I have been using the PICKit2 to programm my 16F690 projects. Now I am needing to use the PIC 16F676. What can I use to programm this item? Will the evaluation board that came with the PICKit2 be sufice or will I need another?
Cheers
JOHN
Programmer
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Programmer
Hello,
Yes the 16F676 will work on the evaluation board and allow you to program using the PICkit. Simply insert the chip at the top of the socket so the pin marked as pin 1 is in the same position as pin 1 on the 16F690 device would be.
Yes the 16F676 will work on the evaluation board and allow you to program using the PICkit. Simply insert the chip at the top of the socket so the pin marked as pin 1 is in the same position as pin 1 on the 16F690 device would be.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel