![Image](http://www.matrixmultimedia.com/images/USBPack.gif)
The Flowcode USB Pack allows for communications between a PC and a USB enabled PICmicro device to be established and utilized in a very simple manner. The Pack includes three new Flowcode components to provide three different methods of connecting to a PC via USB.
USB Serial - Replaces the old RS232 COM port.
USB Slave - Allows for direct microcontroller control via a DLL library.
USB HID - Creates a human interface to the PC.
The USB pack has support for the following microchip PICmicro devices:
18F2450, 18F2455, 18F2550, 18F4450, 18F4455, 18F4550
The following Matrix products are also supported by the USB Pack:
Formula Flowcode, ECIO28, ECIO40, MIAC, EB006 Multiprogrammer*, HP488 Dev board*
* When used with a EB055, a compatible crystal and a USB enabled PICmicro device.
The following Microchip products are also supported by the USB Pack:
PICDEM FS USB Demo Board
Included in the Pack:
USB serial Flowcode component
USB slave Flowcode component
USB HID Flowcode component
Flowcode example files
Installation guide
Component help files
VB interface examples
Labview interface examples
You can download the USB Pack by following the link below and filling out the form.
http://www.matrixmultimedia.com/FlowcodeUSBPack.php