Display TM1637!
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Display TM1637!
Hi All!
I have just received some of these display TM1637:
https://www.ebay.com/itm/Red-Blue-Green ... 2749.l2649
I have made a small testprogram i FC8 with the TM1637 component.
In addition to a clock, it can be used for many other purposes.
All functions working perfect with FC8.
Br Jorgen-
I have just received some of these display TM1637:
https://www.ebay.com/itm/Red-Blue-Green ... 2749.l2649
I have made a small testprogram i FC8 with the TM1637 component.
In addition to a clock, it can be used for many other purposes.
All functions working perfect with FC8.
Br Jorgen-
- Attachments
-
- TM1637.fcfx
- (13.08 KiB) Downloaded 759 times
-
- Posts: 19
- Joined: Fri Dec 07, 2018 11:34 am
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
Re: Display TM1637!
Hello.
I am French teacher.
Where did you find the TM1637 7SEGMENT(QUAD) ?
Thanks.
I am French teacher.
Where did you find the TM1637 7SEGMENT(QUAD) ?
Thanks.
-
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Display TM1637!
Also available from Displays -> Display: Segment, it's right near the bottom of the displays list.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Display TM1637!
Yes, if you use the search then where the location of component is will be shown.Benj wrote:Also available from Displays -> Display: Segment, it's right near the bottom of the displays list.
See the green outline in the image on my previous post.
Martin
-
- Posts: 19
- Joined: Fri Dec 07, 2018 11:34 am
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
Re: Display TM1637!
Bonjour,
Je suis désolé de vous répondre par la négative.
Mais je n'ai pas le TM1637 dans ma bibliothèque.
Ci-joint, ma copie d'écran.
Je suis désolé de vous répondre par la négative.
Mais je n'ai pas le TM1637 dans ma bibliothèque.
Ci-joint, ma copie d'écran.
-
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Display TM1637!
You must have the latest version installed!
Vous devez avoir la dernière version installée
Vous devez avoir la dernière version installée
Martin
-
- Posts: 19
- Joined: Fri Dec 07, 2018 11:34 am
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
Re: Display TM1637!
Merci beaucoup..
Effectivement, c'était tout siple.
Je vous remercie beaucoup.
Bonne soirée
Effectivement, c'était tout siple.
Je vous remercie beaucoup.
Bonne soirée
-
- Posts: 161
- Joined: Sun Feb 25, 2007 10:56 am
- Location: bucharest, romania
- Has thanked: 90 times
- Been thanked: 34 times
- Contact:
Re: Display TM1637!
Good evening!
I use this topic to avoid opening another.
I have an application where I have to use 3 quad 7 segment displays.I have found that I can use the quad 7 segment display led by the TM1637 driver in Flowcode. I already have 3 displays available. Now I have some questions about component 7Segment (Quad TM1637), which I hope to find answers here:
1. How do I send Flowcode information to the 3 displays if they are cascaded?
2. How can I use the decimal point (dp)?
Thanks in advance!
Puiu
L.E.
3. How do I "print" custom characters?
I use this topic to avoid opening another.
I have an application where I have to use 3 quad 7 segment displays.I have found that I can use the quad 7 segment display led by the TM1637 driver in Flowcode. I already have 3 displays available. Now I have some questions about component 7Segment (Quad TM1637), which I hope to find answers here:
1. How do I send Flowcode information to the 3 displays if they are cascaded?
2. How can I use the decimal point (dp)?
Thanks in advance!
Puiu
L.E.
3. How do I "print" custom characters?
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Display TM1637!
Hello,
You can simply just connect different I/O to different display pins. This allows you to connect and control multiple units.1. How do I send Flowcode information to the 3 displays if they are cascaded?
Does your unit have a DP outputs? Can you show us which specific unit you are using.2. How can I use the decimal point (dp)?
Currently we allow the characters 0-9 and A-F. I can expose a lower level macro to allow you to control the individual segments if this would help.3. How do I "print" custom characters?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 161
- Joined: Sun Feb 25, 2007 10:56 am
- Location: bucharest, romania
- Has thanked: 90 times
- Been thanked: 34 times
- Contact:
Re: Display TM1637!
Yes, it has decimal points and I have to use it ...
If it connects cascaded, I only have two lines of command CLK and DIO.
I want, for example, to write "u" or "U", how can I do that?
Thank you!
If it connects cascaded, I only have two lines of command CLK and DIO.
I want, for example, to write "u" or "U", how can I do that?
Thank you!
- Attachments
-
- WhatsApp Image 2019-02-04 at 3.33.02 PM.jpeg (103.59 KiB) Viewed 20771 times
-
- WhatsApp Image 2019-02-04 at 3.33.01 PM.jpeg (88.23 KiB) Viewed 20771 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Display TM1637!
Aha we based the component off the Grove module which doesn't have the decimal points or the cascade functionality.
Let me investigate for you.
Let me investigate for you.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 161
- Joined: Sun Feb 25, 2007 10:56 am
- Location: bucharest, romania
- Has thanked: 90 times
- Been thanked: 34 times
- Contact:
Re: Display TM1637!
I am already on the second project with TM1637 and I'm struck by the same problem: I can not use the decimal point. This time I really need to, because I'm doing a DRO.
Can anyone change TM1637 component for FC8?
Thank you!
Can anyone change TM1637 component for FC8?
Thank you!
- Attachments
-
- b13e8fee-a75e-432e-9994-49c884f5509f.jpg (73.07 KiB) Viewed 18608 times
-
- Posts: 161
- Joined: Sun Feb 25, 2007 10:56 am
- Location: bucharest, romania
- Has thanked: 90 times
- Been thanked: 34 times
- Contact:
Re: Display TM1637!
Please help me at least by directly accessing the segments to print custom characters, with the decimal point I can do by myself with the addition of a transistor.
Thank you!
Thank you!
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Display TM1637!
Hello,
Thanks for letting me know. I have added a new ShowSegments macro to allow you to manually control the individual display segments.
Thanks for letting me know. I have added a new ShowSegments macro to allow you to manually control the individual display segments.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 161
- Joined: Sun Feb 25, 2007 10:56 am
- Location: bucharest, romania
- Has thanked: 90 times
- Been thanked: 34 times
- Contact:
Re: Display TM1637!
First of all, thank you for helping me again, sir!
I did a test, but I do not see how the macro works ...
Can you look at the file?
Once again, thank you!
I did a test, but I do not see how the macro works ...
Can you look at the file?
Once again, thank you!
- Attachments
-
- test_TM1637.fcfx
- (9.51 KiB) Downloaded 410 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Display TM1637!
Hello,
Sorry I forgot to check the simulation was running too. I've now fixed this and it should now be working nicely.
Please note I have changed the parameters for the new SetSegments macro slightly so you will have to edit any icons that reference the function.
Sorry I forgot to check the simulation was running too. I've now fixed this and it should now be working nicely.
Please note I have changed the parameters for the new SetSegments macro slightly so you will have to edit any icons that reference the function.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 161
- Joined: Sun Feb 25, 2007 10:56 am
- Location: bucharest, romania
- Has thanked: 90 times
- Been thanked: 34 times
- Contact:
Re: Display TM1637!
Now, everything seems to be all right and everything goes well.
Thank you again!
Thank you again!