PIC32MZ2048EFM100 simulation error. (SOLVED)

An area to discuss 32-bit PIC specific problems and examples

Moderator: Benj

Post Reply
Lagoda
Posts: 170
Joined: Fri Jul 15, 2016 9:51 pm
Has thanked: 69 times
Been thanked: 61 times
Contact:

PIC32MZ2048EFM100 simulation error. (SOLVED)

Post by Lagoda »

Hi All,

I would like to ask for help.
I have a CURIOSITY PIC32 MZ EF development board with PIC32MZ2048EFM100 processor.
Unfortunately, I can not start the simulation of flowchart with this processor.
I tried on two computers (WIN7 64bit HUN on both machines).
On one of two computer, if I click on the simulation launch icon, then Flowcode7 crashed. (I get a Windows message: Flowcode V7 Operation Stopped)
If I press the F5 key for start the simulation then nothing happens.

For the Flowcode V7 running on another computer, the simulation can not be started.
(I can not start the simulation either with F5 and Start icon, but the Flowcode is running, do not stopped. )

I use Flowcode v7.2.0.5 and Flowcode_7_Latest_170717 files.

The simulation is working well for 8-bit and 16-bit processors.

Thank you in advance for your help.

Lagoda
Attachments
PIC32MZ_test.fcfx
(6.4 KiB) Downloaded 288 times
Last edited by Lagoda on Mon Jul 24, 2017 8:49 pm, edited 2 times in total.

User avatar
QMESAR
Valued Contributor
Valued Contributor
Posts: 1287
Joined: Sun Oct 05, 2014 3:20 pm
Location: Russia
Has thanked: 384 times
Been thanked: 614 times
Contact:

Re: PIC32MZ2048EFM100 simulation error.

Post by QMESAR »

Hi.

For what it is worth your Flowchart runs fine with me in FC7 and WIN10 .
:D
Attachments
1.jpg
1.jpg (28.52 KiB) Viewed 8361 times

Lagoda
Posts: 170
Joined: Fri Jul 15, 2016 9:51 pm
Has thanked: 69 times
Been thanked: 61 times
Contact:

Re: PIC32MZ2048EFM100 simulation error.

Post by Lagoda »

Hi,

Thank you for checking.
I guess it will be.

Would anyone try it in Windows 7 too?

Lagoda

User avatar
LeighM
Matrix Staff
Posts: 2178
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 481 times
Been thanked: 699 times
Contact:

Re: PIC32MZ2048EFM100 simulation error.

Post by LeighM »

Runs OK on my Windows 7 (64bit) too

User avatar
STibor
Posts: 263
Joined: Fri Dec 16, 2011 3:20 pm
Has thanked: 116 times
Been thanked: 113 times
Contact:

Re: PIC32MZ2048EFM100 simulation error.

Post by STibor »

Lagoda wrote:
I use Flowcode v7.2.0.5 and Flowcode_7_Latest_170717 files.
Hello,

The current version is Flowcode v7.2.1.4, I think you should update it.
After the upgrade, add the repair package.
Windows7 prof. 64bit HUN works perfectly for simulation.

Mr. LeighM will support this developer circuit?
I think this card has internal programming hardware.
How to use it? Or should PicKit3 be programmed?

Lagoda
Posts: 170
Joined: Fri Jul 15, 2016 9:51 pm
Has thanked: 69 times
Been thanked: 61 times
Contact:

Re: PIC32MZ2048EFM100 simulation error. (SOLVED)

Post by Lagoda »

Hello Tibor,


Yes, that was the problem.
For the board has an ICSP Header connector.
I use PICKIT3 programmer for the programming.
Thanks for the help.

Lagoda

Post Reply