Good Afternoon,
in the Target List i could not find PIC16LF720 , does anyone knows a way to use / programm this type with Flowcode ?
Best regards
Stefan
How to use / programm PIC16LF720
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: How to use / programm PIC16LF720
Hello Stefan,
Currently we don't support this device, however it should be fairly simple to add it as it is supported by the compiler.
I'll have a quick look for you now and see if we can get it in.
Currently we don't support this device, however it should be fairly simple to add it as it is supported by the compiler.
I'll have a quick look for you now and see if we can get it in.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: How to use / programm PIC16LF720
They were fairly simple to add so here are the definition files.
Simply extract the contents of the attached archive into your "Flowcode 7/FCD/PIC" folder and restart Flowcode. The new devices should then appear in the chip selection list.
Let me know if you have any problems.
Simply extract the contents of the attached archive into your "Flowcode 7/FCD/PIC" folder and restart Flowcode. The new devices should then appear in the chip selection list.
Let me know if you have any problems.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: How to use / programm PIC16LF720
Dear Benj,
thank you very much for your reply.
Copied the files and they appeared in the chip selection list.
Best regards
Stefan
thank you very much for your reply.
Copied the files and they appeared in the chip selection list.
Best regards
Stefan