PIC18F2431 PWM
PIC18F2431 PWM
How does one access all five of the PIC18F2431's PWM outputs, also everytime I bring the macro up it says disabled??
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Hello
Flowcode can currently only control a maximum of 2 PWM channels. These are numbered 1 and 2. You can use the hardware macros to enable the PWM channels and to set the mark space ratio.
Flowcode can currently only control a maximum of 2 PWM channels. These are numbered 1 and 2. You can use the hardware macros to enable the PWM channels and to set the mark space ratio.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Benj,Benj wrote:Hello
Flowcode can currently only control a maximum of 2 PWM channels. These are numbered 1 and 2. You can use the hardware macros to enable the PWM channels and to set the mark space ratio.
Could you please expand on the hardware macro setting up please with a specific run through example. i can't turn of the 'disabled' showing on the PWM component itself. I must be messing up the variable settings so a little more explanation would be appreciated.