When I have Interrupts in a Program the simulation can become pretty frantic. ( I might be doing something wrong!)
It would be handy to be able to manually trigger Interrupts when i simulation mode... essentially a button press is seen as the interrupt.
Simulating Interupts - Manual triggering
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Simulating Interupts - Manual triggering
Hi Jay Dee,
The port interrupts can be triggered manually.
All you do is add a switch then assign it to for connection for the required interrupt.
Then pressing switch should trigger ISR macro
Martin
The port interrupts can be triggered manually.
All you do is add a switch then assign it to for connection for the required interrupt.
Then pressing switch should trigger ISR macro
Martin
Martin