Hi Benj
With the colour sensor can you please confirm I need to connect the 14V from the EB006 to VPWR on the sensor motherboard rather than 5v to V+
Don't want to blow anything
Colour Sensor
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: Colour Sensor
Hi John,
You need to connect both your logic power Vcc(5v to pin 1) and the Vpwr (to pin 8 )
Vcc drives the logic and Vpwr drives the white LEDs
Regards,
Leigh
ps. pin numbers above are the module pins, when using EB090 motherboard, just connect both V+ and Vpwr from EB006 to EB090
You need to connect both your logic power Vcc(5v to pin 1) and the Vpwr (to pin 8 )
Vcc drives the logic and Vpwr drives the white LEDs
Regards,
Leigh
ps. pin numbers above are the module pins, when using EB090 motherboard, just connect both V+ and Vpwr from EB006 to EB090