When stepping through a programme in simulation a couple of times, txt on screen is not cleared as you go through the DISPLAYCLEAR macro, it only seems to clear later in the programm if something else is written to the display.
Problem seen on MIAC and on EB006 / EB005 boards using FC6.06.
Bug reported here as "Bug Report" in FC6 help fails to send report.
Regards,
Chris
LCD simulation not clearing
Moderator: Benj
-
- Posts: 186
- Joined: Wed Jan 23, 2013 3:43 pm
- Has thanked: 2 times
- Been thanked: 21 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: LCD simulation not clearing
Hi Chris,
I had a quick go at replicating the problem with this test file but it seems to be running fine here on my machine under 6.0.7. Does this program have the same problem for you?
I had a quick go at replicating the problem with this test file but it seems to be running fine here on my machine under 6.0.7. Does this program have the same problem for you?
- Attachments
-
- LCDtst.fcfx
- (4.83 KiB) Downloaded 214 times
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 186
- Joined: Wed Jan 23, 2013 3:43 pm
- Has thanked: 2 times
- Been thanked: 21 times
- Contact:
Re: LCD simulation not clearing
Hi,
"Yes" your test seems to work OK on my machine, Ive attached my programme using a MIAC, and added a comment just above the last macro in MAIN "DisplayClear" which should remove the "Working" message
Regards,
Chris
"Yes" your test seems to work OK on my machine, Ive attached my programme using a MIAC, and added a comment just above the last macro in MAIN "DisplayClear" which should remove the "Working" message
Regards,
Chris
- Attachments
-
- NewEngine AuxECU.fcfx
- (36.89 KiB) Downloaded 196 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: LCD simulation not clearing
Cheers Chris,
Managed to replicate the issue with your program though if I try and replicate elsewhere it works as expected. I'll have a dig and see if I can work out what's going wrong.
Managed to replicate the issue with your program though if I try and replicate elsewhere it works as expected. I'll have a dig and see if I can work out what's going wrong.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 186
- Joined: Wed Jan 23, 2013 3:43 pm
- Has thanked: 2 times
- Been thanked: 21 times
- Contact: