Hi,
Been trying out Formula flowcode with Bluetooth expansion and also with LCD(EB024 & EB005). Can't figure what are scripts in the bluetooth ext connections and how to write them. What ports are also used in blutooth. All I know is that the LCD uses 5 bits of port D. I am using flowcode version 5. I have also v6 but having a hard time using. Is there any sample program or test program that I can use to start with?
One other thing where do I edit the adresses of the device I can't seem to turn my bluetooth board on. I can't detect it any device both laptop and smartphone.
Need help. I can't get the bluetooth working. Also I confuse where I would connect the UART connection from the buggy to the bluetooth board.
Thanks.
Marc Bernz
EB024 Bluetooth program
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EB024 Bluetooth program
Hello Marc,
Please see this post here relating to connections.
http://www.matrixmultimedia.com/mmforum ... 13&t=14381
Please see this post here relating to connections.
http://www.matrixmultimedia.com/mmforum ... 13&t=14381
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: EB024 Bluetooth program
What about the scripts or the addressing in the program of the bluetooth? Anyone knows about it?