Hello,
I have a problem in viewing the panel properties. It is not possible to edit any component properties in dashboard or system panel.
New patch run succesfully. All other items in view menu are visible.
Can anybody give an idea what might be?
Thanks
Problem with panel properties
Moderator: Benj
-
- Posts: 13
- Joined: Sun Nov 17, 2013 12:38 pm
- Has thanked: 1 time
- Been thanked: 2 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Problem with panel properties
Hello,
The window might be docked somewhere. If you go into the View menu then maybe try disabling and re-enabling the window and see if you can see anything change on screen which might indicate where the window is docked.
I think there is a way of resetting all the windows so I will find out for you.
The window might be docked somewhere. If you go into the View menu then maybe try disabling and re-enabling the window and see if you can see anything change on screen which might indicate where the window is docked.
I think there is a way of resetting all the windows so I will find out for you.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 13
- Joined: Sun Nov 17, 2013 12:38 pm
- Has thanked: 1 time
- Been thanked: 2 times
- Contact:
Re: Problem with panel properties
Hello Benj,
I have done this already just before my post. Nothing seems to change on the screen. It will be very helpful if I could reset the windows view.
Thanks In advance mate,
Pantelis
I have done this already just before my post. Nothing seems to change on the screen. It will be very helpful if I could reset the windows view.
Thanks In advance mate,
Pantelis
- JonnyW
- Posts: 1230
- Joined: Fri Oct 29, 2010 9:13 am
- Location: Matrix Multimedia Ltd
- Has thanked: 63 times
- Been thanked: 290 times
- Contact:
Re: Problem with panel properties
Hi.
if you delete the registry key:
CURRENT_USER\Software\MatrixMM\FlowCodeV6\Workspace
This should reset your window layouts.
Cheers,
Jonny
if you delete the registry key:
CURRENT_USER\Software\MatrixMM\FlowCodeV6\Workspace
This should reset your window layouts.
Cheers,
Jonny
-
- Posts: 13
- Joined: Sun Nov 17, 2013 12:38 pm
- Has thanked: 1 time
- Been thanked: 2 times
- Contact:
Re: Problem with panel properties
Ok I did it and it's true the windows reseted.
Now I can see the property window again.
Thanks very much Johnny and Ben.
Regards
Now I can see the property window again.
Thanks very much Johnny and Ben.
Regards