Flowcode 6.0.3 Released
Moderator: Benj
- JonnyW
- Posts: 1230
- Joined: Fri Oct 29, 2010 9:13 am
- Location: Matrix Multimedia Ltd
- Has thanked: 63 times
- Been thanked: 290 times
- Contact:
Flowcode 6.0.3 Released
Good morning.
We are pleased to announce that Flowcode 6.0.3 has been released.
You can get the patch by clicking Help -> Check for updates in Flowcode.
A note on this patch:
We have had reports of graphical lockups on previous versions of FCv6. I believe inconsistent OpenGL drivers are a main issue of this. For this reason I have set Flowcode to use a software OpenGL implementation by default if one is available. If you experience graphical glitches and Flowcode previously worked fine, go to Global Options->Application and select "OpenGL hardware" as the graphics mode. This will put Flowcode into a similar state to in previous builds.
Enjoy.
Jonny
We are pleased to announce that Flowcode 6.0.3 has been released.
You can get the patch by clicking Help -> Check for updates in Flowcode.
A note on this patch:
We have had reports of graphical lockups on previous versions of FCv6. I believe inconsistent OpenGL drivers are a main issue of this. For this reason I have set Flowcode to use a software OpenGL implementation by default if one is available. If you experience graphical glitches and Flowcode previously worked fine, go to Global Options->Application and select "OpenGL hardware" as the graphics mode. This will put Flowcode into a similar state to in previous builds.
Enjoy.
Jonny
- JohnCrow
- Valued Contributor
- Posts: 1367
- Joined: Wed Sep 19, 2007 1:21 pm
- Location: Lincolnshire
- Has thanked: 364 times
- Been thanked: 716 times
- Contact:
Re: Flowcode 6.0.3 Released
Hi
Just installed the 6.0.3 patch and Kaspersky threw a wobbler
Says the fc_launcher.exe file has malware. (I know it hasn't) and tried deleting it.
It has also deleted the boostc_16F.exe file
Sorry didn't manage to get a screen shot of that one
Kaspersky Version 13.0.1.4190
Just installed the 6.0.3 patch and Kaspersky threw a wobbler
Says the fc_launcher.exe file has malware. (I know it hasn't) and tried deleting it.
It has also deleted the boostc_16F.exe file
Sorry didn't manage to get a screen shot of that one
Kaspersky Version 13.0.1.4190
1 in 10 people understand binary, the other one doesn't !
- JonnyW
- Posts: 1230
- Joined: Fri Oct 29, 2010 9:13 am
- Location: Matrix Multimedia Ltd
- Has thanked: 63 times
- Been thanked: 290 times
- Contact:
Re: Flowcode 6.0.3 Released
Hi. Cheers John. We can, I think, pass these exes on to the security companies and hopefully get them white-listed. Its good to know, anyway.
I think it is probably because they are wrapped up in a security layer. I'm surprised Flowcode hasn't also been targeted, but fc_launcher.exe and boostc_16F.exe have not changed in this patch, so its probably a vkiller update that has introduced this.
Jonny
I think it is probably because they are wrapped up in a security layer. I'm surprised Flowcode hasn't also been targeted, but fc_launcher.exe and boostc_16F.exe have not changed in this patch, so its probably a vkiller update that has introduced this.
Jonny
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Re: Flowcode 6.0.3 Released
Can we please get english back?? I'm running a dutch Win7 so FC6 defaults to dutch. Trying to set the language in 'Options' lists a lot of languages, but either I'm overlooking english or it is not there...
What do I need to do to switch FC6 back to english??? (Which file(s) do I delete?)
What do I need to do to switch FC6 back to english??? (Which file(s) do I delete?)
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
- JonnyW
- Posts: 1230
- Joined: Fri Oct 29, 2010 9:13 am
- Location: Matrix Multimedia Ltd
- Has thanked: 63 times
- Been thanked: 290 times
- Contact:
Re: Flowcode 6.0.3 Released
Hi Jac. Very sorry, I never thought of those systems that defaulted to non-English!
Each language has a .mxd file stored in the languages directory. I did not generate one for English as I didn't think this was necessary! Clearly an oversight.
I will post a file first thing tomorrow.
Jonny
Each language has a .mxd file stored in the languages directory. I did not generate one for English as I didn't think this was necessary! Clearly an oversight.
I will post a file first thing tomorrow.
Jonny
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Re: Flowcode 6.0.3 Released
Hi Jonny,
No problem. I renamed both the mxd and dll for NL, solved the issue for now.
Jac
No problem. I renamed both the mxd and dll for NL, solved the issue for now.
Jac
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
BUG Confiuration settings still not importing from FC5
Configuration settings are still not transferred from FC5 to FC6.
For example I have FC5 with configuration settings: When loaded into FC6 settings are: These settings are the preset default settings, and setting from FC5 have been completely ignored.
That would mean someone importing their FC5 flowchart into FC6, may find it may not work and is down to wrong configuration settings.
Martin
For example I have FC5 with configuration settings: When loaded into FC6 settings are: These settings are the preset default settings, and setting from FC5 have been completely ignored.
That would mean someone importing their FC5 flowchart into FC6, may find it may not work and is down to wrong configuration settings.
Martin
Martin
- JohnCrow
- Valued Contributor
- Posts: 1367
- Joined: Wed Sep 19, 2007 1:21 pm
- Location: Lincolnshire
- Has thanked: 364 times
- Been thanked: 716 times
- Contact:
Security Software
As my earlier post, still been having problems with Kaspersky Internet Security 2013 and FC6 (also had problems with FC5 and FC6 with the latest KIS 2014.
I've used Kaspersky for quite a few years with no problems, but after a lot of tweaking it still wouldn't work with FC it had to go.
Just tried bitdefender 2014, and it works fine, I can run and compile with FC V5 and V6
Be interested if anyone else has tried bitdefender and what they think of it.
I've used Kaspersky for quite a few years with no problems, but after a lot of tweaking it still wouldn't work with FC it had to go.
Just tried bitdefender 2014, and it works fine, I can run and compile with FC V5 and V6
Be interested if anyone else has tried bitdefender and what they think of it.
1 in 10 people understand binary, the other one doesn't !
-
- Posts: 13
- Joined: Sun Nov 17, 2013 12:38 pm
- Has thanked: 1 time
- Been thanked: 2 times
- Contact:
Re: Flowcode 6.0.3 Released
How exactly can we do that. My default after 6.03 patch turned in Greek.kersing wrote:Hi Jonny,
No problem. I renamed both the mxd and dll for NL, solved the issue for now.
Jac
Thanks in advance
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: Flowcode 6.0.3 Released
Hi
Too change back follow the pictures below, when you've pressed ok flowcode will ask to restart ,select ok and when flowcode reopens it should be back to English
Regards
Dazz
Too change back follow the pictures below, when you've pressed ok flowcode will ask to restart ,select ok and when flowcode reopens it should be back to English
Regards
Dazz
- Attachments
-
- 3.jpg (82.25 KiB) Viewed 9617 times
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php
-
- Posts: 13
- Joined: Sun Nov 17, 2013 12:38 pm
- Has thanked: 1 time
- Been thanked: 2 times
- Contact:
Re: Flowcode 6.0.3 Released
Hello Dazz,dazz wrote:Hi
Too change back follow the pictures below, when you've pressed ok flowcode will ask to restart ,select ok and when flowcode reopens it should be back to English
Regards
Dazz
The strange is that when the language option is not ticked the language is by default Greek.
Can we do something about that?
Regards
Pantelis
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Re: Flowcode 6.0.3 Released
Flowcode defaults to the language settings of Windows. f you want to use English right now you need to remove/rename the language files for Greek. The files are inpantelisthrylos7 wrote: The strange is that when the language option is not ticked the language is by default Greek.
Can we do something about that?
32 bit windows: c:\Program Files\Flowcode6\languages\
64 bit windows: c:\Program Files (x86)\Flowcode6\languages\
The files you need to (re)move are:
FlowEL.dll
FlowEL.mxd
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
-
- Posts: 13
- Joined: Sun Nov 17, 2013 12:38 pm
- Has thanked: 1 time
- Been thanked: 2 times
- Contact:
Re: Flowcode 6.0.3 Released
kersing wrote:Flowcode defaults to the language settings of Windows. f you want to use English right now you need to remove/rename the language files for Greek. The files are inpantelisthrylos7 wrote: The strange is that when the language option is not ticked the language is by default Greek.
Can we do something about that?
32 bit windows: c:\Program Files\Flowcode6\languages\
64 bit windows: c:\Program Files (x86)\Flowcode6\languages\
The files you need to (re)move are:
FlowEL.dll
FlowEL.mxd
Thanks a lot. I appreciate!!