Hi, Im using a EBM001 and flowcode v6, the display works fine in simulation but when I put the code into hardware (using a PIC 16F877A on the EB 006 board) pluging into port B, the text is mirror imaged and in the wrong orrientation (by comparison with the simulation). I cant find anything either is software or hardware that would give this effect. Help anyone?
Regards,
Chris
EBM001-GLCD Mirror Immage
-
- Posts: 186
- Joined: Wed Jan 23, 2013 3:43 pm
- Has thanked: 2 times
- Been thanked: 21 times
- Contact:
-
- Posts: 186
- Joined: Wed Jan 23, 2013 3:43 pm
- Has thanked: 2 times
- Been thanked: 21 times
- Contact:
Re: EBM001-GLCD Mirror Immage
Just an update, module works fine when using Flowcode 5 so looks like a V6 issue?
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EBM001-GLCD Mirror Immage
Hi Chris,
I have found the issue and it is now resolved. The file below should fix the issue if copied into your "Flowcode v6/Components" folder before starting Flowcode.
This fix will be included in the next update release.
I have found the issue and it is now resolved. The file below should fix the issue if copied into your "Flowcode v6/Components" folder before starting Flowcode.
This fix will be included in the next update release.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel