windows 8

siliconchip · Post by **siliconchip** » Fri Dec 28, 2012 1:53 pm

hi has anyone had any success running flowcode 5 on a pc using windows 8

Post by **JohnCrow** » Fri Dec 28, 2012 3:06 pm

Hi
I tried windows 8 RC during the summer.
It will install and run FC5 but was unable to get the USB drivers to work.

http://www.matrixmultimedia.com/mmforum ... +windows+8

Think there are more threads discussing this as well so it will be worth doing a search.

siliconchip · Post by **siliconchip** » Fri Dec 28, 2012 10:16 pm

hi john were these the drivers for the usb to your programmer board

Post by **DavidA** » Sun Dec 30, 2012 10:58 pm

http://www.matrixmultimedia.com/support ... f=30&t=803

this faq might help

dazz · Post by **dazz** » Mon Dec 31, 2012 12:06 am

Hi David
Although i havent got a eb006, using your link the drivers installed straight away

Regards
Dazz

siliconchip · Post by **siliconchip** » Mon Dec 31, 2012 2:58 pm

hi dazz

so you are up and running with flowcode on windows 8 after following the link

dazz · Post by **dazz** » Mon Dec 31, 2012 4:10 pm

the driver installed with no problems, i havent got a matrix programmer but my easypic board works fine
Regards
Dazz

siliconchip · Post by **siliconchip** » Mon Dec 31, 2012 5:58 pm

thats good to know as im using an easy pic 5 programmer board as well

mauro · Post by **mauro** » Fri May 31, 2013 11:17 am

Like a charm... thanx

Matrix user forums

windows 8

windows 8

Re: windows 8

Re: windows 8

Re: windows 8

Re: windows 8

Re: windows 8

Re: windows 8

Re: windows 8

Re: windows 8