The I2C component is almost ready.
Is there anyone that fancies a bit of Beta testing.
The Component is a Master only I2C controller which has implementations for Hardware and Software (bit banged).
The software Baud rate is fixed at the moment but the hardware baud rate can be configured by referring to the PICmicro datasheet. Note you must have MI2C compatible PICmicro to use the hardware implementation.
There is a small problem with the read byte function as it causes Flowcode to report a serios error has occured. However this can be ignored for now.
Contact me at support@matrixmultimedia.co.uk to get a copy of this beta component.
I2C component is almost ready
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
I2C component is almost ready
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel