I2C component is almost ready

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 2 and 3.

Moderators: Benj, Mods

Post Reply
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

I2C component is almost ready

Post by Benj »

The I2C component is almost ready.

Is there anyone that fancies a bit of Beta testing.

The Component is a Master only I2C controller which has implementations for Hardware and Software (bit banged).

The software Baud rate is fixed at the moment but the hardware baud rate can be configured by referring to the PICmicro datasheet. Note you must have MI2C compatible PICmicro to use the hardware implementation.

There is a small problem with the read byte function as it causes Flowcode to report a serios error has occured. However this can be ignored for now.

Contact me at support@matrixmultimedia.co.uk to get a copy of this beta component.
Top
Mark
Posts: 209
Joined: Thu Oct 19, 2006 11:46 am
Location: Bakewell, UK
Has thanked: 20 times
Been thanked: 16 times
Contact:
Contact Mark

Post by Mark »

Hi Benj,

Send me a copy, I don't have much time at the moment but may be able look next week sometime.

Mark
Go with the Flow.
Top
ALAN_26
Posts: 84
Joined: Sat Apr 29, 2006 3:36 pm
Location: MALTA
Contact:
Contact ALAN_26

Post by ALAN_26 »

i would like to try it too if it is possible

Thanks in Advance

Alan .
Top
Post Reply

Return to “Flowcode V2 & V3”