Is it possible for an analog multiplexer to convert a biopolar signal to a unipolar signal? I'd like to use a homemade oscilloscope to measure positive and negative voltage.
Thanks!
Analog Multiplexer for ADC Stm32f103c8t6
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: Analog Multiplexer for ADC Stm32f103c8t6
As you probably realise, the ADC will only be capable of accepting input voltages between its power rails.
So you would need to buffer the signal with an Op Amp so as to provide a gain or signal reduction
as well as an offset such that 0v at the test point gives mid-rail at the ADC input.
Google some Op Amp circuits
So you would need to buffer the signal with an Op Amp so as to provide a gain or signal reduction
as well as an offset such that 0v at the test point gives mid-rail at the ADC input.
Google some Op Amp circuits
-
- Valued Contributor
- Posts: 688
- Joined: Fri Jun 06, 2014 3:53 pm
- Has thanked: 185 times
- Been thanked: 204 times
- Contact:
Re: Analog Multiplexer for ADC Stm32f103c8t6
Hi
Following on from Leigh, this gives some examples of what you are trying to achieve.
https://ocw.mit.edu/courses/media-arts- ... 2_bias.pdf
Regards
Following on from Leigh, this gives some examples of what you are trying to achieve.
https://ocw.mit.edu/courses/media-arts- ... 2_bias.pdf
Regards