Hello,
this is Component macro in MODBUS Slave (SCADA)
could you kindly share how to retrieve the info ( INDEX 0 thru INDEX 3)
*======================================*
GetLastIncoming
Gets a value from the last incoming command.
Index 0 = 0 Read / 1 Write
Index 1 = 0 Coils / 1 DigInput / 2 AnInput / 3 Register
Index 2 = Address
Index 3 = Number
Parameters
This macro has no parameters
Return value
UINT
*======================================*
Thank you
MODBUS RTU help
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: MODBUS RTU help
Thanks for letting us know.
Hopefully should be fixed for you now via the update system.
Hopefully should be fixed for you now via the update system.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel