A visual bug.
Using an ATTiny MCU (I tried 88 and 22 others maybe affected too) - set the clock speed to > max speed (so for I tried 16 and 32MHz) - this (correctly) says 'greater than max speed' - but then displays the 'loading targets' with whirly. This stays until clicking 'cancel' which gets rid of it and no harm done..
Martin
Clock setting
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Clock setting
Hi Martin,
Thanks for letting us know, that's certainly a strange one. I'll pass this onto Steve so he is aware of it.
Thanks for letting us know, that's certainly a strange one. I'll pass this onto Steve so he is aware of it.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Clock setting
Hi Martin,
Thanks for identifying this glitch. I've checked Flowcode v9 and this problem doesn't happen there. I've also identified what's happening in the code for v8, but I'm not going to fix it as it's a minor issue that doesn't cause any other problems.
Regards,
Steve.
Thanks for identifying this glitch. I've checked Flowcode v9 and this problem doesn't happen there. I've also identified what's happening in the code for v8, but I'm not going to fix it as it's a minor issue that doesn't cause any other problems.
Regards,
Steve.