Hi all
I am setting up another project with the settings based on a previous working setup driving a GLCD. I want to use ports A6 & A7 but they are grayed out as if in use as OSC1 & OSC2, I think I have disabled all usage of the external oscillator functions to release the ports for general use. Hopefully someone looking from a different angle can see where the issue is, the 1 second test is bang on.
Thanks
Ian
Ports A6 & A7 not accessible
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Ports A6 & A7 not accessible
Hi Ian,
As a temp unofficial fix can you try the attached file?
You will need to place it in C:\ProgramData\MatrixTSL\FlowcodeV8\FCD\PIC which is hidden by default.
If file was added when Flowcode was running then flowchart will require reloading.
As a temp unofficial fix can you try the attached file?
You will need to place it in C:\ProgramData\MatrixTSL\FlowcodeV8\FCD\PIC which is hidden by default.
If file was added when Flowcode was running then flowchart will require reloading.
- Attachments
-
- 18LF27J13.fcdx
- (54.82 KiB) Downloaded 154 times
Martin
Re: Ports A6 & A7 not accessible
Hi Martin
Thank you for your reply, I have replaced the file and reloaded FC but the ports remain grayed out, would you mind having another look please.
Many thanks Ian
Thank you for your reply, I have replaced the file and reloaded FC but the ports remain grayed out, would you mind having another look please.
Many thanks Ian
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Ports A6 & A7 not accessible
Hi Ian,
Working okay for me: Did it state you already have a file with the same name and do you want to replace the file in the desination?
Working okay for me: Did it state you already have a file with the same name and do you want to replace the file in the desination?
Martin
Re: Ports A6 & A7 not accessible
You are a genius Martin, my mistake was to allow FC to do an update which rolled the file back!
All good now, thank you!
Ian
All good now, thank you!
Ian
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Ports A6 & A7 not accessible
Thanks Ian,
Glad you sorted it now.
No problem easily done.
I have not got the chip to test A6 &7.
Hopefully will work okay.
Glad you sorted it now.
Yes that will do it.
No problem easily done.
I have not got the chip to test A6 &7.
Hopefully will work okay.
Martin
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Ports A6 & A7 not accessible
I have moved topic to bug reports for Matrix staff to sort out.
Martin
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Ports A6 & A7 not accessible
Thanks Martin,
This one should be fully sorted now, found a few devices with the same problem.
This one should be fully sorted now, found a few devices with the same problem.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact: