I would like to use the ADC module of PIC16F15324 MCU .
The Vdd of the circuit is 3.3V.
I set the reference voltage source to the FVR on the AD Properties tab.
I inserted the following line in C code: FVRCON = 0x82; to select the 2.048V internal reference source. But is not working.
Based on the result of the AD conversion, the reference voltage is always 3.3V and I can't change it, but I really want it.
![Smile :)](./images/smilies/icon_smile.gif)
Can you help me?
Best regards,
Lagoda