Microchip MCP9600 Thermocoupler

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 8.

Moderator: Benj

Post Reply
Roy Johnston
Flowcode V4 User
Posts: 220
Joined: Mon Aug 24, 2009 8:38 am
Has thanked: 2 times
Been thanked: 34 times
Contact:

Microchip MCP9600 Thermocoupler

Post by Roy Johnston »

Does flowcode support the Microchip MCP9600 Thermocouple.

chipfryer27
Valued Contributor
Valued Contributor
Posts: 618
Joined: Fri Jun 06, 2014 3:53 pm
Has thanked: 184 times
Been thanked: 195 times
Contact:

Re: Microchip MCP9600 Thermocoupler

Post by chipfryer27 »

Hi

There is no direct support for the MCP9600 but it does support the MAX31855 thermocouples.

However as the MCP9600 communicates via I2C you could probably use the generic I2C component in Flowcode to talk to the MCP9600.

Regards

Roy Johnston
Flowcode V4 User
Posts: 220
Joined: Mon Aug 24, 2009 8:38 am
Has thanked: 2 times
Been thanked: 34 times
Contact:

Re: Microchip MCP9600 Thermocoupler

Post by Roy Johnston »

Thank You.
Has anyone else managed to get flowcode to use the MCP9600. that is able to send me an example of how to read from it.

Post Reply