FC9 XMEGA ILI9341 SPI problem

[ko072vvs]

Hello there! I write here. I can't log in to the new forum. I have a problem with flowcode 9. the xmega32a4 and TFT ili9341 controller does not work SPI
with software everything is fine. XMEGA 32Mhz dividers have experienced all of the pin dc set to 0 and 1. all exactly is not working.

[ko072vvs]

Everything worked. Need CS out=1
now it does not work to clean the display,
help

[ko072vvs]

clearing the display does not work on set display orientation (2) and (3). on 1 and 0, everything is fine. dimensions PW 320 PH240. did pw 240 ph 320/ also does not work. Although in FC 8 and 8.2 it worked.

[ko072vvs]

Heloooooo?

[Steve]

Flowcode v9 support is handled on a dedicated forum, so you should request support there:

https://www.flowcode.co.uk/forums/index.php

[Benj]

Should be fixed for you now.

[ko072vvs]

wtf.

Безымянный.png (173.44 KiB) Viewed 4712 times

[Steve]

There's a post here about logging in to the new forum that will hopefully help:
https://www.matrixtsl.com/mmforums/view ... 25#p104325

[ko072vvs]

it doesn't work i've already visited this site

[Steve]

The image you posted shows you are trying to log in with this forum login details, but the new forum uses the login details for your MatrixTSL/Flowcode account, and *NOT* the old this forum login.

If you are still having problems, please give more details and we'll try to help.

[ko072vvs]

I have the same account

[Steve]

I still don't understand what problem you are experiencing.

Is the problem with your username or your password? You can update your password here:
https://flowcode.co.uk/accounts/login/reset/

[jgu1]

Even after reset it doesn´t work look here: https://www.matrixtsl.com/mmforums/view ... 76&t=22551