Hi! I'm new around here and to FlowCode8. I have been struggling to get interrupts working in this particular program. I have attached the Compile log as well as the program. If anyone can tell me why this is not working , I'd be eternally grateful .
Thanks
Interrupt Help
Moderator: Benj
Interrupt Help
- Attachments
-
- Test.fcfx
- (32.99 KiB) Downloaded 141 times
-
- FlowCode Compile Log.txt
- (2.35 KiB) Downloaded 121 times
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: Interrupt Help
Hi
If you are not supplying a clock signal to the Timer 0 external clock Pin then the interrupt will never fire,in this case set the Timer clock to Internal Clock (Clock Source Property)
Set The property to Internal as shown below
If you are not supplying a clock signal to the Timer 0 external clock Pin then the interrupt will never fire,in this case set the Timer clock to Internal Clock (Clock Source Property)
Set The property to Internal as shown below
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: Interrupt Help
Hi
No problem made this mistake many times and look hours for the bug
No problem made this mistake many times and look hours for the bug
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR