Hi all, I bought the OLED W click from mikroe and iam trying to run using the avalable component but it is not working. I dont have a D/C connection available on the component.
Running on the pic32mx795F512L, it would need these pins interfaced with the oled W click:
RST
CS
SDI
D/C
while on the component the connections are shown in the attached:
Is there anybody that could help modify the component for my application?
Thanks
Rod
OLED W Click mikroe
Moderator: Benj
-
- Posts: 96
- Joined: Fri Jul 15, 2016 10:51 am
- Has thanked: 24 times
- Been thanked: 5 times
- Contact:
OLED W Click mikroe
- Attachments
-
- OLED W Click.jpg (120.91 KiB) Viewed 3338 times
-
- OLED component.jpg (100.55 KiB) Viewed 3338 times
-
- Posts: 96
- Joined: Fri Jul 15, 2016 10:51 am
- Has thanked: 24 times
- Been thanked: 5 times
- Contact:
Re: OLED W Click mikroe
Hi all, Iam trying to drive the display ssd1306 and Iam having a hard time.
Iam using the bl0032 and click board with oled w (ssd1306) in SPI comm
Can somebody please help with this solution. I realized some folks were able to drive the oled C display
Thanks
Rod
Iam using the bl0032 and click board with oled w (ssd1306) in SPI comm
Can somebody please help with this solution. I realized some folks were able to drive the oled C display
Thanks
Rod
- Attachments
-
- OLED_Teste.fcfx
- (7.7 KiB) Downloaded 128 times
-
- OLED_Teste_SSD1306.fcfx
- (7.7 KiB) Downloaded 134 times
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: OLED W Click mikroe
Hi,
If you are using...
BL0032 E-blocks2 dsPIC Programmer
BL0101 E-blocks2 Click Adaptor board
Then the port pin mapping is as follows...
Reset - 7
CS - 2
SCL - 5
SDA - 3
DC - 6
For Port D/G this would map as...
Reset - G9
CS - D10
SCL - G7
SDA - D11
DC - G8
If you are using...
BL0032 E-blocks2 dsPIC Programmer
BL0101 E-blocks2 Click Adaptor board
Then the port pin mapping is as follows...
Reset - 7
CS - 2
SCL - 5
SDA - 3
DC - 6
For Port D/G this would map as...
Reset - G9
CS - D10
SCL - G7
SDA - D11
DC - G8