Hello,
I updated patch 8.1 to 8.2.
The ongoing project is not loading, Flowcode freezes.
That's not very good now.
Flowcode 8.2 crash
Moderator: Benj
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Flowcode 8.2 crash
I uninstalled the old one and installed the full version 8.2. Crashes while loading the project.
Arduino nano uart rx interrupt macro stops loading.
Arduino nano uart rx interrupt macro stops loading.
- Attachments
-
- flow82_crash.png
- (68.88 KiB) Downloaded 1503 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Flowcode 8.2 crash
Hello,
Thanks for letting us know. I haven't experienced anything like this.
Does the crash happen if you start a new project file or open a different project file?
Can you attach the project file causing the problem so we can try and replicate here. You can send to me via a PM if the file is sensitive.
Thanks for letting us know. I haven't experienced anything like this.
Does the crash happen if you start a new project file or open a different project file?
Can you attach the project file causing the problem so we can try and replicate here. You can send to me via a PM if the file is sensitive.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Flowcode 8.2 crash
I can't create a new project.
1. Flowcode opens
2. embedded
3 target selection Arduino nano 328, okay button, and then the program freezes.
1. Flowcode opens
2. embedded
3 target selection Arduino nano 328, okay button, and then the program freezes.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Flowcode 8.2 crash
Ok thanks. I can't replicate this problem.
I've asked Daniel to have a look for you. He will probably come back with more questions to try and get to the cause of the issue.
Can you tell us more about your PC. Version of Windows, hard drive type, etc.
I've asked Daniel to have a look for you. He will probably come back with more questions to try and get to the cause of the issue.
Can you tell us more about your PC. Version of Windows, hard drive type, etc.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Flowcode 8.2 crash
Please can you try the following and let us know how you get on.
Open Flowcode.
Click View -> Global Options.
Click the Application tab.
Click the "Reset Data Files" button.
Click Yes on the dialogue window that opens.
Close Flowcode and then try to open your project again.
Open Flowcode.
Click View -> Global Options.
Click the Application tab.
Click the "Reset Data Files" button.
Click Yes on the dialogue window that opens.
Close Flowcode and then try to open your project again.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Flowcode 8.2 crash
Hi!
Hmm, FC8.2 ? when I go in help and check for update, and get the update, I still have 7.1.1.11 is there a path somewhere, and if, where is it published, Please.
SORRY FOUND IT
Br jorgen
Hmm, FC8.2 ? when I go in help and check for update, and get the update, I still have 7.1.1.11 is there a path somewhere, and if, where is it published, Please.
SORRY FOUND IT
Br jorgen
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Flowcode 8.2 crash
Thanks!Benj wrote:Please can you try the following and let us know how you get on.
Open Flowcode.
Click View -> Global Options.
Click the Application tab.
Click the "Reset Data Files" button.
Click Yes on the dialogue window that opens.
Close Flowcode and then try to open your project again.
That's good.