Hi,
Is there a way to interface any kind of I2C display with PIC12F675 ?
For example: LCD (16x2) or 0.96 inch Oled or any other type.
Looking forward for the guidance please.
Regards
PIC12F675 display
PIC12F675 display
- Attachments
-
- OLED.jpg (21.87 KiB) Viewed 11152 times
-
- LCD..jpg (25.46 KiB) Viewed 11152 times
- Bachman
- Posts: 116
- Joined: Sun Sep 07, 2014 11:37 am
- Location: Hungary
- Has thanked: 9 times
- Been thanked: 53 times
- Contact:
Re: PIC12F675 display
I think, you should choose other PIC. PIC12F675 don't have enough memory regions to handle I2C and displays. Check for PIC12F1840.
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: PIC12F675 display
Hello.
Before purchasing a different microcontroller, you can work out the minimum RAM requirements of a display by multiplying the resolution and then diving by 8.
E.g if using 128 x 64, the minim RAM required is
If it was me I would go with the microcontroller that is the next size up e.g 2048 bytes of RAM
Before purchasing a different microcontroller, you can work out the minimum RAM requirements of a display by multiplying the resolution and then diving by 8.
E.g if using 128 x 64, the minim RAM required is
Code: Select all
128 x 64 / 8 = 1024 bytes RAM
Martin