Hi
Anybody used these before are they any good ?
https://www.peaktest.co.uk/
Steve
Spring Contact Test Probes
- AbhijitR
- Posts: 299
- Joined: Fri Nov 07, 2014 12:48 pm
- Location: Pune, India
- Has thanked: 280 times
- Been thanked: 79 times
- Contact:
Re: Spring Contact Test Probes
Hello! Steve
I have used this type of spring loaded test probes in the past for few applications, one of them was to program the PIC controller in the manufacturing process, and the other was in the testing zig where I even supplied 230V AC supply to the step down transformer, and for your knowledge it works without any problem. Yes, but the one I used were not of the manufacturer you mentioned, I purchased those online locally but I am sure those are Chines but it solved the purpose for me.
I have attached a picture for your reference, I hope this will help you.
Abhi
I have used this type of spring loaded test probes in the past for few applications, one of them was to program the PIC controller in the manufacturing process, and the other was in the testing zig where I even supplied 230V AC supply to the step down transformer, and for your knowledge it works without any problem. Yes, but the one I used were not of the manufacturer you mentioned, I purchased those online locally but I am sure those are Chines but it solved the purpose for me.
I have attached a picture for your reference, I hope this will help you.
Abhi
- Attachments
-
- POGO_Pins.jpg (133.93 KiB) Viewed 3556 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Spring Contact Test Probes
We use similar pins in some of our test rigs too, they work wekk but they are exensive.
We get them from Farnell I beleive.
https://uk.farnell.com/c/test-measureme ... cts-probes
We get them from Farnell I beleive.
https://uk.farnell.com/c/test-measureme ... cts-probes
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
Re: Spring Contact Test Probes
Cheers AbhijitR & Ben
My main concern are they robust do they bend / break Easley ? Our guys are not the most delicate.
Do they withstand miss alignment a bit of rough handling i.e. putting the PCB into the Test Jig
Steve
My main concern are they robust do they bend / break Easley ? Our guys are not the most delicate.
Do they withstand miss alignment a bit of rough handling i.e. putting the PCB into the Test Jig
Steve
Success always occurs in private and failure in full view.
- AbhijitR
- Posts: 299
- Joined: Fri Nov 07, 2014 12:48 pm
- Location: Pune, India
- Has thanked: 280 times
- Been thanked: 79 times
- Contact:
Re: Spring Contact Test Probes
Hello! Steve
Yes indeed you can count on that, the pins are strong enough to handle the pressure while plugging or locking in the test jig, the one I use, as per the information mentioned on the sellers website can withstand 180g of pressure.
I have attached couple of pictures how I use the pins, hope this helps you to understand something more.
Abhi
Yes indeed you can count on that, the pins are strong enough to handle the pressure while plugging or locking in the test jig, the one I use, as per the information mentioned on the sellers website can withstand 180g of pressure.
I have attached couple of pictures how I use the pins, hope this helps you to understand something more.
Abhi
- Attachments
-
- POGO_Pins2.jpg (82.14 KiB) Viewed 3511 times
-
- POGO_Pins1.jpg (99.61 KiB) Viewed 3511 times