T6963C macro FC7 does not work. FC8 works

For questions and comments on programming in general. And for any items that don't fit into the forums below.

Moderators: Benj, Mods

Post Reply
Dutch
Posts: 102
Joined: Mon Aug 19, 2013 8:38 am
Location: Netherlands
Has thanked: 24 times
Been thanked: 5 times
Contact:

T6963C macro FC7 does not work. FC8 works

Post by Dutch »

I made a test program around a LGM12864 Longtech display with T6963C controller, but it does not show the correct things on the display. :? The display came out a working unit.
After searching for answers I found a similar tread in these forums about a fix in a component macro for a GLCD display. not this one though. I updated my FC7 to latest version but still no good. I installed the 30 day trail FC8 and now all works without changes!

I am not upgrading to FC8 yet. is there a possibility to have the component macro fixed for my future FC7 use after the FC8 expires :wink:

Let me know if you guys need more info.
Regards Angelo.

Post Reply