Hi all,
On Flowcode 5 I cannot get the examples that are provided by Matrix to work.
Everything loads correctly except when it runs the rotary encoder component disappears when the simulation is started or stepped into and it's driving me nuts.
Am I doing something wrong please? The test file from the Matrix site is attached here - all I want to do is increase a number when I go clockwise and decrease that number when I go anti-clockwise.
James :-}
EB-073 - Rotary Encoder Problem...
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: EB-073 - Rotary Encoder Problem...
Hi James,
I'm afraid that the encoders in Flowcode 5 do not simulate, hence the disappearing when simulating.
Flowcode 6 onwards the encoder component does simulate correctly.
I'm afraid that the encoders in Flowcode 5 do not simulate, hence the disappearing when simulating.
Flowcode 6 onwards the encoder component does simulate correctly.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel