Page 1 of 1
How to use / programm PIC16LF720
Posted: Sat Jun 10, 2017 6:41 pm
by skammann
Good Afternoon,
in the Target List i could not find PIC16LF720 , does anyone knows a way to use / programm this type with Flowcode ?
Best regards
Stefan
Re: How to use / programm PIC16LF720
Posted: Tue Jun 13, 2017 11:43 am
by Benj
Hello Stefan,
Currently we don't support this device, however it should be fairly simple to add it as it is supported by the compiler.
I'll have a quick look for you now and see if we can get it in.
Re: How to use / programm PIC16LF720
Posted: Tue Jun 13, 2017 12:08 pm
by Benj
They were fairly simple to add so here are the definition files.
Simply extract the contents of the attached archive into your "Flowcode 7/FCD/PIC" folder and restart Flowcode. The new devices should then appear in the chip selection list.
- PIC.zip
- (11.2 KiB) Downloaded 240 times
Let me know if you have any problems.
Re: How to use / programm PIC16LF720
Posted: Fri Jun 16, 2017 9:21 am
by skammann
Dear Benj,
thank you very much for your reply.
Copied the files and they appeared in the chip selection list.
Best regards
Stefan