EEPROM
Moderator: Benj
- PaulNe
- Posts: 27
- Joined: Fri Jul 05, 2013 8:36 am
- Has thanked: 2 times
- Been thanked: 23 times
- Contact:
Re: EEPROM
Hi Osta,
I do not have an 18F45K80 to test with, however, I changed the uC to a 16F1937 and using our EB006 with an LED board on PORTD. For me it is working perfect.
I added an EEPROM write to the code, to write my own value, and then verify by reading it back. It works perfectly in both hardware and simulation.
Hope this helps?
Paul
I do not have an 18F45K80 to test with, however, I changed the uC to a 16F1937 and using our EB006 with an LED board on PORTD. For me it is working perfect.
I added an EEPROM write to the code, to write my own value, and then verify by reading it back. It works perfectly in both hardware and simulation.
Hope this helps?
Paul
- Attachments
-
- MD_7_MatrixEdit.fcfx
- (7.09 KiB) Downloaded 287 times
Re: EEPROM
Hi Paul!
Yes, with this processor, it works!
And with my not working .....
Yes, with this processor, it works!
And with my not working .....
- Attachments
-
- EEPROM_OK.jpg
- (414.31 KiB) Downloaded 993 times
Re: EEPROM
Hi paul!
Put update FC7_Latest_Files_040816.
EEPROM began to work !!!
But only a comma.
Through the point enters an incorrect value.
Regards Slava.
Put update FC7_Latest_Files_040816.
EEPROM began to work !!!
But only a comma.
Through the point enters an incorrect value.
Regards Slava.
- Attachments
-
- MD_7.fcfx
- (6.27 KiB) Downloaded 287 times
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact: