I use Designspark in combination with FC7
But somehow there is an issue with flowcode V7 beamer. I will upload an attachment to see if someone know how to solve this issue.
Ok lets say the position of the rotating blade doesn't block the beamer. But the beamer still see its light is blocket.
Designspark Blocks Beamer
Moderator: Benj
Designspark Blocks Beamer
- Attachments
-
- PulsProc806B.fcfx
- TryOutBeamer
- (17.12 KiB) Downloaded 285 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Designspark Blocks Beamer
Hello,
Please can you also attach the mesh files in a .zip archive, or use primitives objects so we can have a look and try and replicate the problem you're having.
Please can you also attach the mesh files in a .zip archive, or use primitives objects so we can have a look and try and replicate the problem you're having.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Designspark Blocks Beamer
Attached the Mesh File
Thanks for reply
Frank
Thanks for reply
Frank
- Attachments
-
- Part806PulsSchijf2d.mesh
- (9.25 KiB) Downloaded 273 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Designspark Blocks Beamer
Hi Frank,
Thanks for the file but there seems to be a lot of mesh files in the project.
I have created a simple working example that hopefully should help you.
With a mesh you will probably find that the beam break triggers on the bounding box rather than the inner mesh. A way around this might be to create a turbine out of primitive objects.
Thanks for the file but there seems to be a lot of mesh files in the project.
I have created a simple working example that hopefully should help you.
With a mesh you will probably find that the beam break triggers on the bounding box rather than the inner mesh. A way around this might be to create a turbine out of primitive objects.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Designspark Blocks Beamer
Thanks for your reply. I allready thought so too. So I might create the same but then buid up from several Mesh objects
Guess no choice. But thanks anyway.
kind regards
Frank
Guess no choice. But thanks anyway.
kind regards
Frank